Professioneel Licht & geluid
Resultaat 1–16 van de 42 resultaten wordt getoond
-
American Dj LED PAR 64 DMX witte LED’s
PAR 64 LED schijnwerper. Specificatie:-
- Besturing: DMX-512
-
- 151 witte LED
-
- 3 DMX-kanalen (strobo, dimmer en rimpel)
-
- Lage warmteafvoer en geen UV-straling
-
- Laag energieverbruik
-
- Lange levensduur van LED's
-
- Montagemateriaal inbegrepen
-
- Inclusief filterframe
-
- Afmetingen: 292 x 267 x 343 mm
- Gewicht: 2,2 kg
-
-
APart PM1122INT 2-zone Remote Interface
Multifunctional : that’s probably how collegues will see the PM 1122. Imagine a stereo amplifier that can be used in a supermarket with 10 check-out lines. A church with 5 mics that need a a noisegate, or even a professional stereo zone. An AMX, Crestron or cue-controlled meeting room ? Your wish has now become reality : the PM1122 can handle every application and makes the use of a whole string of pre-amps superfluous ! The PM1122 is a high grade manufactured and produced pre-amplifier. It offers a 4-level priority system with emergency input. It has a volume-adjustable chime, and all controls are equipped with clear LED's for an easy overview. It is possible to connect 5 mic/line inputs with phantom power each. There is a general noisegate for the mic inputs. Each signal is assignable to one or both output zones through a dipswitch selector on the front of the unit. Every input has individual tone, gain and volume control. The 5th mic/line input can be linked to or from another PM1122. On the output side, the user will find a 2-zone section. Both zones have a selector that makes it possible to switch between 4 line inputs. There is a music level and mic mix level, and a bass and treble control per zone. The PM1122 has multiple remote options : The PM1122R is an analogue wall control. It has music level and micro mix level control and a line input selector. The PM1122RL : an analogue wall control with local input. This control has the same functions as the PM1122R but also has an XLR microphone input and a balanced line input with volume and tone control (mini jack). Both wired wall controls can be connected with the pre-amplifier through UTP CAT5 cable.Besides, this pre-amplifier can also be controlled via a PC- application. The optional PM1122INT remote interface is connected to the pre-amplifier with a standard UTP CAT5 cable per output zone, and to the PC with an RS-232 connection. PC software is included. Even a wireless remote connection is a possibility ! A wireless wall controller can be fixed just where the user wants it. It offers source selection, mic volume, and music volume control. The PM1122W is available in white and silver. This wall controller connects with the PM1122INT interface through the PM1122R, an optional wireless antenna that can be plugged into this interface. Thanks to all these possibilities, the PM1122 is an extremely versatile pre-amplifier that can be used in almost every maginable situation! Refurbished Oorspronkelijke prijs was: € 109,95.€ 79,95Huidige prijs is: € 79,95. incl. 23% BTW -
Audio Authority 1394A HDMI splitter versterker
- Model 1394A distributes HDMI audio and video signals from one source to four HDMI displays. Audio Authority 1390-series HDMI Distribution Amplifiers use high quality Silicon Image HDMI Chipsets, capable of delivering 1080p video at refresh rates up to 60 Hz, and color bit depths up to 36 bits. Bitstream audio is also supported - including LPCM 7.1 channel uncompressed audio, Dolby Digital TrueHD (7.1), and DTS HD: Master Audio (7.1). Legacy codecs such as Dolby Digital and DTS core are also supported.
- Supports 1080p/60 and 1080p/24
- 36 bit Deep Color (sum of all channels)
- Dolby TrueHD and Dolby Digital Plus (bitstream throughput)
- DTS HD and DTS HD: Master Audio (bitstream throughput)
- LPCM Uncompressed Audio (7.1 channels)
- Lip-sync compensation
- Fully HDCP compliant
- Supports HDTV, EDTV, and SDTV resolutions
- 1 input, 4 outputs (HDMI)
- HDMI licensed and certified
- Compatible with today's 120 Hz and 240 Hz high definition televisions
- All metal construction
- Video Formats: 480i/p, 576i/p, 720p, 1080i/p, up to 1920x1200
- Color Processing: 36 bit Deep Color (12 bits per TMDS color channel)
- Internal signal equalization circuit
- Audio Processing: Lossless and uncompressed audio formats, including Dolby TrueHD and DTS-HD: Master Audio, LPCM 7.1 channel
- Bandwidth: 20Hz to 20KHz
- Multi-channel Digital: Yes
- Frequency Response: 10-50KHz
- Dimensions (HxWxD, inches):2 x 8 5/8 x 5 1/4
- Shipping Weight: 3.7 lbs.
- Product Weight: 1.88 lbs.
- Data Rate: 2.25Gbps (single link)
- Signal Processing: Compensated, clock phase adjusted
- Jitter Processing: Reconstituted signal; jitter free
- TMDS Clock Speed: 225MHz
- Maximum Cable Length: Input - 20m (66 ft.) @ 1080p/8 bit; Output - 15m (49 ft.) @ 1080p/8 bit
- Agency Approvals: FCC, CE, RoHS
- DC Input Connector: locking type, 5VDC
- Power Supply
- 1394A
-
Botex DC-4P-G analoge lichtsturing
Botex DC-4P-G analoge lichtsturing met schuko op de achterkant. 99 verschillende programmas en 8 verschillende functies (zoals speed music, speed, auto, dimmer).Tips of opmerkingen over dit product
- Deze analoge dimmer wordt veel gebruikt in de verhuur. Hij kan tegen een stootje en is makkelijk in gebruik.
€ 79,95 incl. 23% BTWSpecificaties
Productspecificaties
- 4-kanaals lichtsturing
- 40+ verschillende programmas
- 32 scenes programmeerbaar (real level)
- 8 verschillende functies
- Dimmer per kanaal & Master dimmer
- Snelheidregeling met "tap functie"
- Fade time instelling
- Ingebouwde microfoon
- 5A per kanaal belastbaar
- Schuko uitgang
-
BOTEX DD-4 4-way DMX Splitter
4 way DMX distributor Used € 39,95 incl. 23% BTW -
Conference Microphone TMS-3 TMS3 1103 65 cm
- conference microphone
- total length 65 cm
- length flexible part 40 cm
- on/off switch
- with cushion
-
Digidesign Digi 001 MX001 Audio Recording Interface
Digidesign Digi001 HD-Recording System MX001, 19" rack with 2x MicPreamp, ADAT I/O connectors on the PCI card, 2x S/P-DIF, 24bit, Midi In/Out, Monitor Out, Headphone Out. Inclusief snake kable !! Zonder pci card !! € 49,95 incl. 23% BTW -
Dynacord DCS 409 DCS409 80443B line af relay module
These modules provide relay contact closures for use in switching audio or other control functions. The DCS 409/409R is capable of switching line level audio signals or control outputs. The modules have CE marking as well as UL and CSA recognition for DCS 409. The module is to be mounted on the rear of a PA-system rack-shelf or inside of a suitable distribution box. It is primarily used for switching 70V loudspeaker lines. The relays can also be used for collective calls, obligatory reception, as E-relays and D-relays, or for general control purposes. Features • Five 70V line relays, 2 switching contacts each, binding post per contact • 5 output binding posts, each with 3 screws and label fields • 5 relay control-LED’s • Configuration of the output distributor is performed through opening wire bridges • 2 connectors for cascading up to 12 modules • 2 binding posts for the connection of an external supply voltage source Foto kan afwijken !! Exclusief accessoires !! € 29,95 incl. 23% BTW -
Dynacord DCS408 DCS 408 100V relais module 80441B
De modules uit de DCS 400-reeks vormen een aanvulling op de beheermogelijkheden van het PROMATRIX-systeem®, waardoor het toepassingsbereik van het systeem wordt uitgebreid. DCS kan ook worden geïntegreerd in een reeds geïnstalleerd systeem als er een extra behoefte is om de functionaliteit uit te breiden. Er zijn 2 opties voor het uitvoeren van modules:- De modules, aangeduid als DCS 4xx, zijn gemaakt in Euro Card-formaat en zijn bevestigd op het achterpaneel van het montageframe of in de daarvoor bestemde vakken.
- Modules aangeduid als DCS 4xxR worden geïnstalleerd in het DCS 400-installatieframe.
-
Dynacord PVA-CSK PAVIRO oproeppostkit
The PMX-CSK call station kit is a call station printed circuit board (PCB) for the PROMATRIX system. The circuit board allows an application-specific call station to be installed, such as a fire department call station.
The call station kit is based on the call station, but has been optimized so that it is easy to adapt to different application areas. In addition to the stem microphone familiar from the PMX-15CST, a dynamic EMERGENCY microphone such as the DBB 9081 can also be connected. The call station kit equipped with an illuminated LC display (122 x 32 pixels).
Dit is een nieuw product !! € 179,95 incl. 23% BTW -
Extron D/2 DA4 DVI 4 Output DVI Distribution Amplifier
The Extron D/2 DA4 DVI is a one input, four output distribution amplifier for DVI digital video signals. It accepts DVI - Digital Visual Interface signals from a computer and distributes up to four identical, independently buffered outputs. The DVI digital output signal can be run up to 15 feet (4.6 meters) using standard DVI patch cables.For applications requiring longer cable runs, Extron has developed the IN9700 Series long distance DVI cables which allow DVI signals to be transmitted up to 75 feet (22.9 meters). For applications requiring even greater lengths, the Extron DVI 201 transmitter and receiver are capable of sending DVI signals up to 200 feet (60 meters) using CAT 5 cable, and the FOX 500 DVI fiber optic transmitter and receiver set can achieve transmissions at extreme distances up to 30 km (18.75 miles). The D/2 DA4 DVI accepts TMDS Transition Minimized Differential Signaling DVI signals at a bit rate of up to 1.6 gigabits/sec/color. It is equipped with DVI-D connectors for a single link of DVI-D. Features- Input: DVI-D male on attached cable
- Output: Four DVI-D female connectors
- Supports single link DVI-D signals up to 1920x1200, including HDTV 1080p/60
- DDC signals are routed to output 1
- Internal universal power supply
-
Extron EDID 101V EDID Emulator with Cable
- Input: 15-pin HD connector
- Output: 15-pin HD connector
- EDID Minder® automatically manages EDID communication between connected devices — EDID Minder ensures that all sources power up properly and reliably output content for display.
- Selectable resolutions and refresh rates — Pre-stored EDID is communicated to the source based on a user-selected resolution and refresh rate.
- EDID capture mode — When connected to a display, the EDID 101V offers the option of capturing and then storing EDID information from the display device.
- Can be powered directly from the VGA source — The EDID 101V can be powered through the incoming VGA source signal, eliminating the need for power supply installation.
- 1" (2.5 cm) high, one-eighth rack width metal enclosure — Housed in a compact, durable metal enclosure, the EDID 101V is small enough to fit anywhere and can be mounted in a rack.
-
Extron VGA stereo audio matrix switcher en distribution amplifier MMX 32 VGA A en MDA 3SVA
The MMX 32 VGA A is designed to route high resolution computer-video and stereo audio signals. The MMX 32 VGA A accepts VGA-UXGA and unbalanced stereo audio input signals and features three 15-pin HD female video input connectors and three 3.5 mm female mini jacks, allowing direct connection to computer video cards and sound cards using a standard VGA and audio cable. Output one is optimized for a local or preview monitor and includes a 3.5 mm stereo mini jack for driving local powered speakers or a recording device. Output two is optimized for connection to the main presentation display and house sound system. The unit can also be controlled through RS-232 by a control system or by contact closure with tally output, which allows the user to control both outputs from remote locations.Features
- Inputs: Video on female 15-pin HD connector; audio on 3.5 mm mini stereo jacks
- Outputs: Video on female BNC and 15-pin HD connectors; audio on captive screw and 3.5 mm stereo mini jacks
- 300 MHz (-3 dB) bandwidth, fully loaded — Ensures switching and distribution of most signals without degradation. The ratings are worst case specifications, i.e., the MMX 32 VGA A provides 300 MHz (-3 dB) at full performance capacity when one input signal drives both outputs.
- Buffered I/O — Each input and output is individually buffered to provide maximum performance and virtually no crosstalk.
- RS-232 control — Using serial commands, the MMX 32 VGA A can be controlled and configured via the included Windows-based control software, or integrated into a control system. Extron products use the SIS™ - Simple Instruction Set command protocol, a set of basic ASCII code commands that allow for quick and easy programming. The RS-232 port also makes it easy to install firmware updates.
- Optional MMX 32 AAP and MMX 32 MAAP remote control modules — Optional control modules provide remote input selection per output. The MMX 32 AAP is a single space AAP - Architectural Adapter Plate, while the MMX 32 MAAP is a single space MAAP - Mini Architectural Adapter Plate. Both include three input selection buttons with corresponding LED indicators.
- 1U, rack-mountable, half rack width metal enclosure — Can be rack-mounted using an optional rack shelf.
- External Extron Everlast™ power supply included, replacement part #70-1174-01 — Provides worldwide power compatibility with high demonstrated reliability and low power consumption
Features
- Input: One female 4-pin mini DIN connector and captive screw connectors
- Outputs: Three female 4-pin mini DIN connectors and captive screw connectors
- Accepts and distributes S-video on female 4-pin mini DIN connectors
- Balanced or unbalanced stereo audio on captive screw connectors
- 270 MHz (-3 db) video bandwidth, fully loaded
- Audio output gain dip switch to maintain unity gain
- Rack, under-desk, and projector-mountable, four per rack
- External Extron Everlast™ power supply included, replacement part #70-1174-01 — Provides worldwide power compatibility with high demonstrated reliability and low power consumption
-
Extron VSW 2VGA A
Two Input VGA and Stereo Audio Switcher The Extron VSW 2VGA A is a compact and economical two input, one output, active switcher for VGA and stereo audio. It allows users to select between two VGA sources with audio and route the selected source to a video output device such as a data monitor or projector. In addition, the VSW 2VGA A provides a buffered local monitor output for input one. Multiple VSW 2VGA A switchers can be daisy-chained using Extron high performance pre-fabricated VGA cable to create a multi-user presentation system.
Inclusief voeding !! Oorspronkelijke prijs was: € 129,95.€ 69,95Huidige prijs is: € 69,95. incl. 23% BTWVSW 2VGA A Video Gain Unity Bandwidth 300 MHz (-3 dB) Video input and loop through Number/signal type 2 VGA-QXGA RGBHV, RGBS, RGsB*, RsGsBs*, HDTV component video* input 1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video* local monitor loop-through NOTE RGsB, RsGsBs, and HDTV component video inputs and outputs work in manual mode only. Autoswitching requires TTL level sync on pin 13 of the 15-pin HD connector. Connectors 3 female 15-pin HD Pin connections ID bits on pins 4, 11, 12, 15 from inputs 1 and 2: passed to main output Pin 9 of input 1: floating Pin 9 of input 2: used for the Show-Me feature Nominal level 1.0 Vp-p for Y of component video 0.7 Vp-p for RGB and for R-Y and B-Y of component video Minimum/maximum levels Analog: 0.4 V to 1.8 Vp-p with no offset Impedance 75 ohms Horizontal frequency 15 kHz to 145 kHz Vertical frequency 30 Hz to 170 Hz Video output Number/signal type 1 VGA-QXGA RGBHV, RGBS, RGsB*, RsGsBs*, HDTV component video* (follows input type) Connectors 1 female 15-pin HD Nominal level 1.0 Vp-p for Y of component video 0.7 Vp-p for RGB and for R-Y and B-Y of component video Minimum/maximum levels 0.4 V to 1.8 Vp-p (follows input) Impedance 75 ohms NOTE ID bits are passed through from VGA inputs to the VGA output. Sync Input type RGBHV, RGBS, RGsB*, RsGsBs*, bi-level and tri-level (HDTV) component video sync Output type RGBHV, RGBS, RGsB*, RsGsBs*, bi-level and tri-level (HDTV) component video sync (follows input) Input level 1.8 V to 5.0 Vp-p Output level TTL: 5.0 V p-p, unterminated Input impedance 510 ohms Output impedance 50 ohms Max. input voltage 5.0 Vp-p Max. rise/fall time 40 ns Polarity Positive or negative (follows input) Audio Gain Unbalanced output: 0 dB Frequency response 20 Hz to 20 kHz, ±0.05 dB THD + Noise 0.002% @ 1 kHz at nominal level (-10 dBV) S/N 94 dB at maximum output (unweighted) Crosstalk -50 dB @ 20 kHz, -75 dB @ 1 kHz and below 60 Hz Stereo channel separation 96 dB @ 1 kHz Audio input Number/signal type 2 stereo, unbalanced Connectors (2) 3.5 mm mini audio jacks (tip, ring, sleeve) Impedance 22k ohms unbalanced, AC coupled Nominal level -10 dBV (316 mVrms) Maximum level +9 dBV, (unbalanced) at 1% THD+N NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu Audio output Number/signal type 1 stereo, unbalanced Connectors (1) 3.5 mm mini audio jack (tip, ring, sleeve) Impedance 50 ohms unbalanced Gain error ±0.1 dB channel to channel Maximum level (Hi-Z) >+9 dBV, unbalanced at 1% THD+N Maximum level (600 ohm) >+7 dBV, unbalanced at 1% THD+N Control/remote — switcher Contact closure (1) 3.5 mm captive screw connector, 3 pole for momentary contact Contact closure pin configurations 1 = input 1 select, 2 = input 2 select, 3 = GND Shorting all three pins together enables autoswitch mode. Loop signal Momentary low, 250 µs General External power supply 100 VAC to 240 VAC, 50-60 Hz, external; to 12 VDC, 1 A (max.), regulated Power input requirements 12 VDC, 0.1 A Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing Cooling Convection, no vents Mounting Rack mount Yes, with optional 1U rack shelf Furniture mount Yes, with optional under-desk mounting kit or through-desk mounting kit Pole mount Yes, with optional pole mount kit Enclosure type Metal Enclosure dimensions 1.0" H x 4.3" W x 3.0" D (quarter rack wide) 2.5 cm H x 10.9 cm W x 7.6 cm D (Depth excludes connectors.) Product weight 0.5 lb (0.3 kg) Shipping weight 3 lbs (2 kg) Vibration ISTA 1A in carton (International Safe Transit Association) Regulatory compliance Listings CE, c-UL, UL Compliances CE, C-tick, FCC Class A, ICES, VCCI Warranty 3 years parts and labor NOTE All nominal levels are at ±10%. NOTE Specifications are subject to change without notice. -
Gemini Firstmix Pro DJ MIDI controller
Gemini designed the FirstMix series of USB controllers to help aspiring DJs advance their skills from beginners to full-fledged artists and the FirstMix Pro rounds out the family with the most professional, comprehensive feature-set. FirstMix PRO interfaces with your PC or Mac via a standard USB connection and the included MixVibes Cross LE acts as a natural complement to the FirstMix hardware with integrated iTunes browsing, automatic BPM detection and manual/auto beat loop capabilities. The popular tried-and-true setup of two decks and a central mixer with two touch-sensitive jog wheels, track sync for matching tempos, and a variety of effects allows you to craft a unique and professional-sounding mix all from your iTunes Library. Even if you're an experienced DJ seeking a portable digital solution for parties and small events, FirstMix Pro gives you a powerful, lightweight option. All you need to create a serious dance party is a laptop, your digital music library and this versatile controller. Features : - Traditional two-deck player layout with cross fader and mixer section - Central mixer section features volume faders and 3-band EQ with Gain Control for each deck - Two large touch-sensitive jog wheels for natural vinyl feel to scratch, cue and pitch bend - Advanced song manipulation tools, including Hot Cues, Loop controls and Effects - Smooth, accurate Pitch Fader for manual beat matching - Sync function for one-touch beat matching - Built-in soundcard with separate Master and Headphone outputs to preview and cue your tracks - Included easy-to-use MixVibes Cross LE DJ software lets you import your iTunes library - Use other digital music libraries with support for M4A, AIFF, WAV, MP3, FLAC and OGG audio files - Works with other popular DJ programs such as Traktor, VirtualDJ and Algoriddim Djay - Type: USB MIDI Controller - Connector Type: Type B - USB Protocol Support: 1.0, 1.1, 2.0 (Hi-Speed) - Power: USB-Powered - Dimensions: 14.9" x 6.9" x 2.4" (370 x 230 x 61 mm) - Weight: 3.5 lbs. (1.6 kg) Dit product is z.g.a.n. en zit compleet in de doos (ongebruikt) !! Oorspronkelijke prijs was: € 179,95.€ 99,95Huidige prijs is: € 99,95. incl. 23% BTW -
Gentner ClearOne XAP 400 XAP400 Audio Conferencing System Microphone Mixer
ClearOne 910-151-201 Model XAP 400 4-channel AEC Microphone Mixer with Built-in Telephone Hybrid and Amplifier, Distributed Echo Cancellation on every mic input, Noise cancellation on each mic/line input, Full-duplex sound enables participants to speak and listen at the same time without cutting in and out, First-mic priority eliminates hollow “tunnel” sound by activating only the microphone closest to the person speaking, Four microphone/line inputs, with four additional line inputs, Eight outputs, 20 Hz-20 kHz bandwidth for full-range audio response, Automatic level control and automatic gain control. General Information- Manufacturer : ClearOne
- Manufacturer Part Number : 910-151-201
- Product Name : Model XAP 400 4-channel AEC Microphone Mixer with Built-in Telephone Hybrid and Amplifier
- Superior Audio Performance
- Distributed Echo Cancellation® on every mic input
- Noise cancellation on each mic/line input
- Full-duplex sound enables participants to speak and listen at the same time without cutting in and out
- First-mic priority eliminates hollow “tunnel” sound by activating only the microphone closest to the person speaking
- Four microphone/line inputs, with four additional line inputs
- Eight outputs
- 20 Hz-20 kHz bandwidth for full-range audio response
- Automatic level control and automatic gain control
- Four input filters on each of four mic inputs; 15 filters on each of four independent processing blocks
- Scalable – link multiple XAP units (XAP 400, XAP 800, XAP TH2) for extensive microphone coverage and up to 16 phone lines
- 25x26 matrix with level control (in .5 dB steps) at each cross point to simplify complex mixing operations; Clear Matrix button easily clears cross points
- Wide variety of system control options: ClearOne IR Remote, Volume Control, Select Control, 3rd-party control systems such as AMX, Crestron
- Configuration control through included G-Ware™ software, RS-232 port
- Enhanced expansion bus, featuring 12 bidirectional audio buses
- Four mic gating groups allow separation of mics into individual mixer gating groups for greater configuration flexibility
- Labels for all inputs, outputs, macros and presets are saved within the unit
- Front panel control of gain and mute
- 32 presets that can be executed on-the-fly without disturbing other ongoing preset operations
- Macro scripting language and recorder simplifies macro creation with point-and-click convenience
- RAMP serial command for greater control over gain adjustments – no external volume card required
- Built-in telephone interface and power amplifier
- Link with multiple XAP TH2s for up to 16-line capability
- Also link to XAP 800 to add conferencing capability
- Inclusief afstandsbediening
