Extra informatie
| Gewicht | 2 kg |
|---|
Extron EDID 101V EDID Emulator with Cable
€ 29,95 incl. 23% BTW
- Input: 15-pin HD connector
- Output: 15-pin HD connector
- EDID Minder® automatically manages EDID communication between connected devices — EDID Minder ensures that all sources power up properly and reliably output content for display.
- Selectable resolutions and refresh rates — Pre-stored EDID is communicated to the source based on a user-selected resolution and refresh rate.
- EDID capture mode — When connected to a display, the EDID 101V offers the option of capturing and then storing EDID information from the display device.
- Can be powered directly from the VGA source — The EDID 101V can be powered through the incoming VGA source signal, eliminating the need for power supply installation.
- 1″ (2.5 cm) high, one-eighth rack width metal enclosure — Housed in a compact, durable metal enclosure, the EDID 101V is small enough to fit anywhere and can be mounted in a rack.
The Extron EDID 101V is an EDID Emulator for VGA computer-video signals. It features EDID Minder®, an Extron exclusive technology designed to provide automatic and continuous EDID – Extended Display Identification Data management. EDID Minder ensures that the source powers up properly and reliably outputs content. Pre-stored EDID is communicated to the source based on a user-selected resolution and refresh rate. Alternatively, the EDID 101V can be set to capture and store EDID information when connected to a display. The EDID 101V can be powered directly from the VGA source or with an optional, external power supply and is housed in a compact 1” high, one-eighth rack width enclosure for convenient, discreet installation.
With cable.
No power supply included !
Refurbished
Gerelateerde producten
-
Vivanco hdmi switch hd 2.1 manu 1.3 zwart
Oorspronkelijke prijs was: € 14,95.€ 9,95Huidige prijs is: € 9,95. incl. 23% BTW -
CRESTRON QM-TX Portable Quick Media Transmitter
The QM-TX provides a low-cost multimedia interface solution for QuickMedia®-based MediaManager systems. As a portable or rack-mounted alternative to Crestron's popular QM FlipTops and Wallplates, the QM-TX can be used in a variety of applications to send audio, video, and computer signals to one or more projectors, plasmas and audio amplifiers using Crestron's exclusive single-wire QuickMedia transport. Installed in a central equipment rack, the QM-TX is ideal for converting the output of a conventional matrix or system switcher to QuickMedia for transmission to a QM Receiver or Distribution Center using just a single inexpensive CresCAT™QM cable. It's also the perfect portable interface, requiring just one RJ45 plus a 4-pin Cresnet connection in any standard wall plate or floor box to provide an extremely simple yet versatile AV or computer input anywhere in the room. Since it's powered by Cresnet, it doesn't even require a connection to AC power. Five BNC's are provided on the QM-TX to accept composite, S-Video, component, HDTV, or RGB signals (up to 1920 x 1200 at 60 Hz). Balanced stereo line-level audio signals are transmitted simultaneously with 24-bit digital resolution. Video formats can be switched dynamically and automatically under system control, and complete MediaManager systems using the QM-TX can be configured easily for a variety of applications using Crestron SystemBuilder™ software. The QM-TX is 1/2-space rack-mountable using the optional ST-RMK kit. Key Features- Portable or rack-mount QuickMedia interface
- RGB, video, S-Video, component & audio inputs
- Video input signal sensing
- Single-cable signal transmission up to 450 feet
-
Inday 4×1 Stereo Audio & Composite Video Switcher with IR
AV4X-R - 4x1 Video & Stereo Audio Switcher General Features- One Wideband Video Channel. Guaranteed 120 MHz bandwidth.
- Two Stereo Analog Audio Channels. Very low noise/distortion specifications.
- Video Channel can be used for switching COAX Digital Audio (PCM/DTS/AC3).
- Remote Controllable! Discrete IR Codes. Remote Control Included.
- RS-232 Serial option for direct computer control. Interface Cable Included.
- Small Size, 2x6x4". Made in the Oregon,USA!
- Easily integrated with other 4X series components.
- inclusief afstandsbediening
-
GRANDTEC GRAND HAND VIEW II PC to TV converter
Grand Hand View II is a handed-size universal VGA to TV converter box. It supports resolution up to 1280x1024* 60Hz. It is best for PC GAME, PC DVD, Internet viewing on TV, Entertainment, Education and Presentation. Box Contains- Grand Hand View II
- VGA to VGA Cable
- Video Cable
- S- Video Cable
- USB Power Cable
- RGB Scart Cable
- User Guide
