Extra informatie
| Gewicht | 5 kg |
|---|
Aanbieding!
APart PM1122INT 2-zone Remote Interface
Oorspronkelijke prijs was: € 109,95.€ 79,95Huidige prijs is: € 79,95. incl. 23% BTW
Multifunctional : that’s probably how collegues will see the PM 1122. Imagine a stereo amplifier that can be used in a supermarket with 10 check-out lines. A church with 5 mics that need a a noisegate, or even a professional stereo zone. An AMX, Crestron or cue-controlled meeting room ? Your wish has now become reality : the PM1122 can handle every application and makes the use of a whole string of pre-amps superfluous ! The PM1122 is a high grade manufactured and produced pre-amplifier. It offers a 4-level priority system with emergency input. It has a volume-adjustable chime, and all controls are equipped with clear LED’s for an easy overview. It is possible to connect 5 mic/line inputs with phantom power each. There is a general noisegate for the mic inputs. Each signal is assignable to one or both output zones through a dipswitch selector on the front of the unit. Every input has individual tone, gain and volume control. The 5th mic/line input can be linked to or from another PM1122. On the output side, the user will find a 2-zone section. Both zones have a selector that makes it possible to switch between 4 line inputs. There is a music level and mic mix level, and a bass and treble control per zone. The PM1122 has multiple remote options : The PM1122R is an analogue wall control. It has music level and micro mix level control and a line input selector. The PM1122RL : an analogue wall control with local input. This control has the same functions as the PM1122R but also has an XLR microphone input and a balanced line input with volume and tone control (mini jack). Both wired wall controls can be connected with the pre-amplifier through UTP CAT5 cable.Besides, this pre-amplifier can also be controlled via a PC- application. The optional PM1122INT remote interface is connected to the pre-amplifier with a standard UTP CAT5 cable per output zone, and to the PC with an RS-232 connection. PC software is included. Even a wireless remote connection is a possibility ! A wireless wall controller can be fixed just where the user wants it. It offers source selection, mic volume, and music volume control. The PM1122W is available in white and silver. This wall controller connects with the PM1122INT interface through the PM1122R, an optional wireless antenna that can be plugged into this interface. Thanks to all these possibilities, the PM1122 is an extremely versatile pre-amplifier that can be used in almost every maginable situation!
Refurbished
Gerelateerde producten
-
Kramer RK-WP16 19 inch Rack Adapter voor 16 Single or 8 Double Wall Plate Inserts (incl. 10 blank inserts)
19-inch rack adapter for wall plate inserts with 8 double slots that can hold 16 single or 8 double slot inserts in a 2U rack space.- Size - Standard 19" (2U).
- incl. 10 blank inserts
-
Digidesign Digi 001 MX001 Audio Recording Interface
Digidesign Digi001 HD-Recording System MX001, 19" rack with 2x MicPreamp, ADAT I/O connectors on the PCI card, 2x S/P-DIF, 24bit, Midi In/Out, Monitor Out, Headphone Out. Inclusief snake kable !! Zonder pci card !! € 49,95 incl. 23% BTW -
KORG MA-1 BLBK metronoom zwart-blauw
De ma-1 van korg is alles wat u van een metronoom mag verwachten. Het tempo is in te stellen van 30 tot 252 bpm waarbij u kunt kiezen voor verschillende ritmes. Dankzij de 0,5 w 23mm speaker heeft u een duidelijke klik of tik. Wanneer dit niet voldoende is kunt u desgewenst ook een hoofdtelefoon aansluiten. De metronoom werkt op twee meegeleverde aaa-batterijen en weegt slechts 71 gram. Productkenmerken- gewicht (incl. Verpakking): 100 gr
- afmeting (incl. Verpakking): 16,0 x 8,5 x 2,0 cm
- soort metronoom: digitaal
- tempo-bereik: 30 - 252 bpm
- clip-on constructie: nee
- ingebouwd stemapparaat: nee
- luidspreker ingebouwd: ja
- hoofdtelefoonuitgang: ja
- kleur: zwart / blauw
-
Dynacord DCS 409 DCS409 80443B line af relay module
These modules provide relay contact closures for use in switching audio or other control functions. The DCS 409/409R is capable of switching line level audio signals or control outputs. The modules have CE marking as well as UL and CSA recognition for DCS 409. The module is to be mounted on the rear of a PA-system rack-shelf or inside of a suitable distribution box. It is primarily used for switching 70V loudspeaker lines. The relays can also be used for collective calls, obligatory reception, as E-relays and D-relays, or for general control purposes. Features • Five 70V line relays, 2 switching contacts each, binding post per contact • 5 output binding posts, each with 3 screws and label fields • 5 relay control-LED’s • Configuration of the output distributor is performed through opening wire bridges • 2 connectors for cascading up to 12 modules • 2 binding posts for the connection of an external supply voltage source Foto kan afwijken !! Exclusief accessoires !! € 29,95 incl. 23% BTW
