Extra informatie
| Gewicht | 5 kg |
|---|
Aanbieding!
RCF ZE 2200 ZE2200 6 zone uitbreidingseenheid
Oorspronkelijke prijs was: € 249,95.€ 149,95Huidige prijs is: € 149,95. incl. 23% BTW
- Directe koppeling naar ZM 2100 of ZM 2124
- ZM 2000 dual-bus systeemarchitectuur: primaire en secundaire bussen
- Interconnectie-aansluitpunten, enkele of dubbele versterkerconfiguratie;
- Hulpinvoer om een programma op de secundaire bus te injecteren
- Schakelen
- GPI- en GPO-logica-poorten;
- Voeding AC of DC24V, 1U 19-inch rackmontage
INPUT SECTIE
- AUX INGANGSGEVOELIGHEID: 1 V (+ 2 dBu)
- AUX INPUT SIGNAL / NOISE RATIO: > 75 dB
- AUX INPUT FREQUENCY RESPONSE: 50 Hz ÷ 20 kHz
- AUX INPUT IMPEDANCE: 10 kP (ongebalanceerd)
UITVOER SECTIE
- PRE OUT max. uitgangsniveau: 1 V
- AMPLIFIER 100 V INGANG MAX. POWER: 240 W
- AMPLIFIER 100 V ingang max. vermogen: 240 W
VERMOGENSVEREISTEN
- VOEDING: 115 V / 230 V ac (50-60 Hz), 24 V
- MAX. STROOMVERBRUIK: 15 W
- BEDRIJFSTEMPERATUUR: – 10 ÷ + 45 ° C (+ 14 ÷ + 113 ° F)
PHISICAL SPECIFICATION
- AFMETINGEN (b, h, d): 438 x 44 x 222 mm (19-inch rek, 1 eenheden)
- NETTOGEWICHT: 3,4 kg
Dit is een showmodel zonder verpakking !!
Gerelateerde producten
-
Kramer TOOLS VP-211DS Automatic VGA / UXVGA / Audio Switcher
The VP-211DS is a high performance switcher for computer graphics video signals, with resolutions ranging from VGA through UXGA and higher, and unbalanced stereo audio signals. When configured as a standby switcher, it will switch to the secondary input upon loss of the primary input.- Inputs: 2 VGA/UXGA on HD15F connectors. 2 unbalanced stereo audio on 3.5 mm mini audio connectors
- Outputs: 1 VGA/UXGA on an HD15F connector. 1 VGA/UXGA on an HD15F connector (input #1 loop). 1 unbalanced stereo audio on a 3.5 mm mini audio connector.
- Max. Output Level: Video: 1.8 Vpp; Audio: 5Vpp.
- Bandwidth (-3db): Video: 300MHz; Audio: 100 kHz.
- Diff. Gain: 0.04%
- Diff. Phase: 0.03 deg.
- Crosstalk: Video: -56 dB @ 5 MHz; Audio: -52 dB @ 1kHz.
- K-Factor: <0.05%
- S/N Ratio: Video: 70.6 dB; Audio: 89 dB unweighted.
- Controls: Input 1 termination switch, contact closure remote control, input 1 ID bit switch (accessible from the underside). Input default selection switches (accessible from the underside).
- Coupling: DC
- Audio THD + NOISE: 0.019%.
- Audio 2nd HARMONIC: 0.003%.
- Power Source: 12 VDC, 50 mA
- Dimensions:12 cm x 7.5 cm x 2.5 cm (4.7” x 2.95” x 0.98”, W, D, H).
- Weight: 0.3 kg. (0.66 lbs.) Approx.
- Accessories: Power supply
- Options: RK-T1 or RK-T3 19 inch rack mount kit.
-
Kramer VP-210K 1:1 Computer Graphics Video Line Amplifier
Product Highlights
- High-Bandwidth (350MHz)
- Compensates for Attenuation of Signals
- Compatible with HDTV Signals
- Level (Gain) & EQ (Peaking) Controls
The Kramer VP-210K Computer Graphics Video Line Amplifier (1:1), with a high-bandwidth (350MHz), compensates for attenuation of signals due to transmission over long cables. It is compatible with HDTV signals, and has Level (Gain) and EQ (Peaking) Controls to control the output of the amplifier. In addition to a looping input, the amplifier has a selectable input signal termination. Provided with selectable Kr-isp Advanced Sync Processing, the VP-210K Computer Graphics Video Line Amplifier (1:1) offers a restoring sync signal, and is compatible with computers that have low-sync level. Being compact in size (4.7 x 2.95 x 0.98” / 12 x 7.5 x 2.5cm), 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adaptor.Oorspronkelijke prijs was: € 109,95.€ 79,95Huidige prijs is: € 79,95. incl. 23% BTW- High-bandwidth (350MHz) amplifier
- Compensates for attenuation of signals due to transmission over long cables
- Compatible with HDTV signals and has Level (Gain) and EQ (Peaking) Controls to control the output of the amplifier
- Looping input
- Selectable input signal termination
- Provided with selectable Kr-isp Advanced Sync Processing
- Offers a restoring sync signal and is compatible with computers that have low-sync level
- Compact in size (4.7 x 2.95 x 0.98" / 12 x 7.5 x 2.5cm)
- 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adaptor
Kramer VP-210K Specs
RefurbishedInput 1 UXGA on a 15-pin HD (F) connector;1 LOOP UXGA on an 15-pin HD (F) connector Output 1 UXGA on a 15-pin HD (F) connector Video Bandwidth 350MHz Differential Gain 0.41% Differential Phase 0.53Deg Video S/N Ratio 66dB K-Factor <0.05% CONTROLS Level: -1.2 to +6.3dB; EQ: 0 to +4dB @50MHz Power Source 5V DC, 108mA Dimensions 4.7 x 2.95 x 0.98" / 12 x 7.5 x 2.5cm Weight 0.25kg (0.55lbs) approx Accessories Power supply Options RK-3T 19" rack adaptor -
Dynacord DCS408 DCS 408 100V relais module 80441B
De modules uit de DCS 400-reeks vormen een aanvulling op de beheermogelijkheden van het PROMATRIX-systeem®, waardoor het toepassingsbereik van het systeem wordt uitgebreid. DCS kan ook worden geïntegreerd in een reeds geïnstalleerd systeem als er een extra behoefte is om de functionaliteit uit te breiden. Er zijn 2 opties voor het uitvoeren van modules:- De modules, aangeduid als DCS 4xx, zijn gemaakt in Euro Card-formaat en zijn bevestigd op het achterpaneel van het montageframe of in de daarvoor bestemde vakken.
- Modules aangeduid als DCS 4xxR worden geïnstalleerd in het DCS 400-installatieframe.
-
Extron VGA stereo audio matrix switcher en distribution amplifier MMX 32 VGA A en MDA 3SVA
The MMX 32 VGA A is designed to route high resolution computer-video and stereo audio signals. The MMX 32 VGA A accepts VGA-UXGA and unbalanced stereo audio input signals and features three 15-pin HD female video input connectors and three 3.5 mm female mini jacks, allowing direct connection to computer video cards and sound cards using a standard VGA and audio cable. Output one is optimized for a local or preview monitor and includes a 3.5 mm stereo mini jack for driving local powered speakers or a recording device. Output two is optimized for connection to the main presentation display and house sound system. The unit can also be controlled through RS-232 by a control system or by contact closure with tally output, which allows the user to control both outputs from remote locations.Features
- Inputs: Video on female 15-pin HD connector; audio on 3.5 mm mini stereo jacks
- Outputs: Video on female BNC and 15-pin HD connectors; audio on captive screw and 3.5 mm stereo mini jacks
- 300 MHz (-3 dB) bandwidth, fully loaded — Ensures switching and distribution of most signals without degradation. The ratings are worst case specifications, i.e., the MMX 32 VGA A provides 300 MHz (-3 dB) at full performance capacity when one input signal drives both outputs.
- Buffered I/O — Each input and output is individually buffered to provide maximum performance and virtually no crosstalk.
- RS-232 control — Using serial commands, the MMX 32 VGA A can be controlled and configured via the included Windows-based control software, or integrated into a control system. Extron products use the SIS™ - Simple Instruction Set command protocol, a set of basic ASCII code commands that allow for quick and easy programming. The RS-232 port also makes it easy to install firmware updates.
- Optional MMX 32 AAP and MMX 32 MAAP remote control modules — Optional control modules provide remote input selection per output. The MMX 32 AAP is a single space AAP - Architectural Adapter Plate, while the MMX 32 MAAP is a single space MAAP - Mini Architectural Adapter Plate. Both include three input selection buttons with corresponding LED indicators.
- 1U, rack-mountable, half rack width metal enclosure — Can be rack-mounted using an optional rack shelf.
- External Extron Everlast™ power supply included, replacement part #70-1174-01 — Provides worldwide power compatibility with high demonstrated reliability and low power consumption
Features
- Input: One female 4-pin mini DIN connector and captive screw connectors
- Outputs: Three female 4-pin mini DIN connectors and captive screw connectors
- Accepts and distributes S-video on female 4-pin mini DIN connectors
- Balanced or unbalanced stereo audio on captive screw connectors
- 270 MHz (-3 db) video bandwidth, fully loaded
- Audio output gain dip switch to maintain unity gain
- Rack, under-desk, and projector-mountable, four per rack
- External Extron Everlast™ power supply included, replacement part #70-1174-01 — Provides worldwide power compatibility with high demonstrated reliability and low power consumption
