Zyxel P-2602R-D1A router

• ADSL2+ VoIP IAD over POTS
• High-speed Internet access: ADSL2+ (24Mbps)
• Flexible SIP account assignment per phone port
• Comprehensive QoS mechanism
• Open SIP standard compliance (RFC3261)
• Secured auto provisioning for Plug-and-play experience

System Specifications

DSL Features

• Support Multi-Mode standard (ANSI T1.413, Issue 2; G.dmt(G.992.1); G.lite(G992.2))
• EOC specified in ITU-T G.992.1
• ADSL2 (G.992.3)
• ADSL2 G.lite.bis (G.992.4)
• ADSL2+ (G.992.5)
• Seamless Rate Adaptation (SRA)
• Auto-negotiating rate adaptation
• ADSL physical connection ATM AAL5 (ATM Adaptation Layer type 5)
• Support multi-protocol over AAL5 (RFC1483)
• Support PPP over ATM AAL5 (RFC2364)
• PPP over Ethernet support for DSL connection (RFC 2516)
• Support VC-based and LLC-based multiplexing
• Support up to 8 PVCs
• F4/F5 OAM
• Zero configuration

Router

• NAT (includes multi-to-multi NAT)/SUA, 1024 NAT sessions
• NAT server (Port forwarding)
• VPN (IPSec, PPTP & L2TP) pass through support NAT
• Protocol and Generic Packet Filter
• DNS Proxy
• Dynamic DNS
• IP Alias
• DHCP client/server/relay
• RIP I/RIP II supported
• Support 16 IP Static route
• IP Multicasting, IGMP v1 and v2
• IP Policy Routing
• UPnP support
• Centralized log

Management

• SNMP v1 & v2c with MIB II
• Embedded FTP/TFTP Server for firmware upgrade and configuration backup and restore
• Telnet for remote management
• Remote Management Control: Telnet, FTP, Web
• Support ZyXEL SPTGEN-based HTTP/HTTPS/TFTP Auto provisioning with secured provisioning file by 3DES encryption
• Remote firmware upgrade
• TR-069/TR-104 support (option)*

Firewall Security

• Stateful Packet inspection (SPI) Firewall
• Prevent DoS Attack
• Access control
• Attack alter and logs
• Packet filtering
• Major Application Layer Gateways (ALGs) support (H323, Netmeeting, SIP, SeeUSeeme
• Content filtering (Jave/Active/Cookie/Keyword blocking)

Other features

• SPTGEN
• Debug tool
• Support H.323 pass through
• Support IGMP proxy
• Voice prioritization using the industry-standard Differentiated Services (DiffServ) protocol
• Multi-media Auto Provisioning (MAP)

Voice Features:

• Section Initiating Protocol (SIP) (RFC 3261) version 2
• SDP(RFC 2327)
• RTP/RTCP (RFC1889, 1890)
• Echo cancellation: G.168
• Silence Suppression
• Comfort Noise Generation (CNG)
• Dynamic Jitter Buffer.
• DTMF Detection and Generation
• DTMF for both In-band or Out-band Traffic with PCM, RFC2833, (SIP INFO)
• Modem and Fax tone detection
• Dialing Type: Tone, Pulse (Auto detection)
• Loop Start and Ground Start
• Ring cadence frequency can be tuned by firmware
• Multiple SIP Account/phone Numbers-Freely assignable to Each Phone Part
• Multiple Channel Technology

Voice Codes

• G.711 (a-law and u-law)
• G.729 a/b
• G.726* (Option)
• G.723* (Option)

Call Feature

• Call Waiting/Call Waiting with Caller ID
• Call Forwarding (Unconditional/Busy/No answer)
• Call Transferring (Blind/Consult On Hold/Attendant)
• Call Hold / Call Retrieve/Second Call
• Speed Dial / Phone Book/Internal Call
• Incoming Call Policy for Unspecified Phone No. (Call Accept/Call Forward/Call Block)
• Three Way Conference with local mixing
• Conference call with Media server
• Flash Hook Timer/Music on Hold
• Interactive Voice Response (IVR)/Early Media
• Message Waiting Indicator (MWI)
• DTMF Relay/Modem Relay
• Fax Relay/T.38 Fax Relay
• Calling Line Identification Presentation (CLIP)
• Calling Line Identification Restriction (CLIR)

Hardware Specifications

• Support 4M flash + 16M SDRAM (default)/4M Flash +32M SDRAM
• RJ-11 for ADSL over POTS/RJ45 for ADSL over ISDN/U-R2
• 1 auto MDI/MDI-X 10/100M Ethernet RJ45 ports for LAN connection
• Restore Factory Defaults/Reboot button
• 2 FXS POTS interface
• Dual Layout Liner power and Switch power
• Follow TR-068 for phone Jack color identification

Physical Specifications

• Item weight: 342 g (0.75 lb)
• Item dimensions (WxDxH): 43 x 124 x 181 mm (1.69″ x 4.88″ x 7.13″)

Environmental Specifications

Operating Environment

• Temperature: 0 to 40 (32°F to 104°F)
• Humidity: 20% to 85% (non-condensing)
• Storage Environment
• Temperature: -20 to 60 (-4°F to 140°F)
• Storage Humidity: 10% to 90% (non-condensi