Traco Power TIS 75-124 24 VDC 3a 115/230 VAC

incl. 23% BTW

Series Description

50, 75, 150, 300, 500, 600 W
Switching power packs with regulated output voltage
Input 115/230 VAC
Low installation depth
Interference suppression vide EN55022, class B
EMV compliant as per EN 61000-6-2
Snap-fastening on DIN cap rail
Screw connector Combicon (included in delivery)
Safety approvals as per EN 60950-1, cUL/UL 60950-1 (File No. 181381) UL 508 C
Output voltage 1, nominal 24 VDC
Output current 1 max. 3 A
Power 75 W
Efficiency 85 %
Input voltage, nominal 100 / 240 VAC
Phases 1
Outputs 1
Width 57 mm
Depth 90 mm
Height 115 mm
System deviation, load <±1.0%
System deviation, supply <±0.2%
Residual ripple 50 mV
Output voltage 1 min. 24 VDC
Output voltage 1 max. 28 VDC
Input voltage, AC min. 93 VAC
Input voltage, AC max. 264 VAC
Operating temperature min. -25 °C
Operating temperature max. +70 °C
Input frequency min. 47 Hz
Input frequency max. 63 Hz
Derating from 50 °C

Product is compleet in de verpakking !

Extra informatie

Gewicht	1 kg

Beoordelingen

Er zijn nog geen beoordelingen.

Wees de eerste om “Traco Power TIS 75-124 24 VDC 3a 115/230 VAC” te beoordelen

Je moet ingelogd zijn om een beoordeling te plaatsen.

Gerelateerde producten

Aanbieding

Burster 8718-100 Potentiometric Linear Displacement Sensor

Displacement sensors model 8718, using a resistance track made of conductive plastic material, are suitable for direct, accurate and absolute measurements of displacements and lengths. Special processes are applied to give the resistance tracks low friction, low tendency to stick/slip, resistance to abrasion and long-term stability. The vibration-cushioned slider allows a clear signal output even by slight shocks or high operating speeds up to 10 m/s. Due to its simple design the sensor is largely protected against electrical interference fields (Al-housing), it keeps the measured value after a power failure and does not generate any electrical interference. A magnetically held steel band covers the whole measurement device gap free. Any lateral forces are avoided by a ball joint coupling mounted to the sensor.

Full scale : 100 mm
Output : Potentiometric
Non-Linearity : ±0.05 % FS, ±0.10 % FS
Resolution : 0.01 mm
Excitation : 0 - 50 V DC
IP Rating : IP40
Min Temperature : -30 °C
Max Temperature 100 °C