Pelco REL2064 Relay Interface Unit 64 Outputs

incl. 23% BTW

Controls up to 64 Relay Contact Outputs. The REL2064 relay interface unit connects directly to the System 6800 matrix switcher/controller and provides dry contacts for direct or automatic control of peripheral equipment. Each REL2064 provides up to 64 single-pole, single-throw (SPST) dry contact outputs.

Features

64 SPST Dry Contact Outputs
Provides Direct or Automatic Control of Peripheral Equipment
Connect to the CM6800 Series Matrix Switchers Using Pelco’s M Protocol
Uses RS-485 Communication Interface
Multiple Units May be Cascaded to Provide Multiple Relay Contact Points on a Single M Port Connection
Relay Output Contacts May be Configured for Normally Open (N.O.) or Normally Closed (N.C.) Operation
Relay Groups Can Retain Their Contact Position in the Event of a Power Failure or Front Panel Reset
Powered by an Auto-Ranging Power Supply

Extra informatie

Gewicht	5 kg

Beoordelingen

Er zijn nog geen beoordelingen.

Wees de eerste om “Pelco REL2064 Relay Interface Unit 64 Outputs” te beoordelen

Je moet ingelogd zijn om een beoordeling te plaatsen.

Gerelateerde producten

Aanbieding

SAMSUNG DVR 4Ch Real-time Standalone H.264 SHR-3040

The SAMSUNG SHR-3040, 4 channel DVR, is designed to be a perfect replacement for the outdated technology of VCRs and a cost effective solution for basic security installation requirements. Its H.264 codec compression makes this DVR a cost effective solution due to the less storage requirements when compared with MPEG4 system. It has up to 4 channel audio input and 1ch of audio output and built in web server for users convenience. SHR-3040 is capable of recording 120 fps at CIF real time recording resolution. Main Features - 4CH DVR - Video ( H.264) / Audio ( ADPCM) - CIF Real-time recording capability ( High Resolution of full D1 Recording Support) - Up to 4Ch Audio Inputs and 1Ch Audio Output - Combined BNC and VGA Video Output for main display ( up to 1280x1024) - SATA I/ F HDD Support ( Internal Max. HDDx1) incl. 23% BTW

Aanbieding

Bosch LTC 2375/50 VidQuad Digital Video Processor

Bosch LTC 2375/50 BASIC QUAD COLOR 230VAC-50/60HZ VidQuad Digital Video Processors use advanced circuitry to produce high quality, true-to-life video. Each input uses an automatic gain and level circuit that increases image accuracy without the annoying on-screen flickering (aliasing) commonly associated with multi-screen displays. The image display is updated at the field rate of 60 fields per second for EIA/NTSC or 50 fields per second for CCIR/PAL, providing genuine real time video. These video processors require no external synchronization and accept video inputs with 2:1 interlaced source. The LTC 2375 Series VidQuad Digital Video Processors are designed for easy installation in applications where you want to view up to four cameras on a single monitor. They offer a full time quad display with no user controls required - truly plug and play. Manufacturer : Bosch Mfr Part No : LTC 2375/50 Refurbished incl. 23% BTW

Aanbieding

Beetronics BEE-7HD 7 inch monitor met SDI en HDMI

Beetronics 7" monitor met SDI en HDMI en stroomnetadapter. Daarnaast oeding mogelijk met behulp van (sony) accu's uit de L-serie (NP-Fxxx) of met een 4p-XLR kabel (niet meegeleverd) Type : BEE-7HD Inclusief hdmi-kabel, houder en voedingsadapter. In nette staat ! Refurbished incl. 23% BTW

Aanbieding

Panasonic WJ-SX150A 16-input matrix switcher

The Panasonic WJ-SX150A matrix switcher supports the connection of up to 16 cameras, 4 monitors and 4 system controllers. Additionally, this unit offers full pan, tilt, zoom and iris control of up to 4, RS-485 equipped cameras. Images outputted from this device can be displayed in full screen on 4 monitors or in various tour groups of up to 16 cameras on a single screen. At the event of an alarm or video loss, this unit can be set to follow a different tour sequence. Setup and configuration is done using a local PC via an RS-232C port with the required software included. 16-Channel Supports the connection of up to 16 color or B/W cameras, 4 monitors and 4 system controllers. Any camera signal can be routed to any connected monitor. PTZ Control Controls up to 4 RS-485 equipped cameras for full pan, tilt, zoom and iris operation. Optional Long Range Operation The use of RG-59 cabling supports cable runs of up to 3000' (900m) while maintaining control, synchronization and high quality images. Multi-Image Display with Auto Switching Images outputted from this unit can be displayed in full or in groups of up to 16 images on a single screen while following a programmed tour sequence. This allows cameras on specific zones or floors to be synchronized together on a designated group of monitors. Alarm Function At the event of an alarm, this unit can be set to follow a new sequential tour set. Video Loss Detection Alerts the operator to problems such as a power outage, severed cables or damaged cameras. Secure User Management Employs a sophisticated user management system to prevent improper use by unauthorized persons. Specificaties

Signal System : NTSC
Channels : 16

Connectors

Video In: BNC x16
Camera Output (loop through): BNC x16
Monitor Output: BNC x1
External Input: BNC x1
External Output: BNC x1
RS-485 (camera) Port: x1 (6-conductor modular jack)
Data Port: RS-485 x1 (6-conductor modular jack)
Alarm Port: 25-pin D-sub connector
Serial Port: 9-pin D-sub connector
Camera Switching Input: RCA x1

Power Requirements : 120 VAC Power Consumption : 60W Operating Temperature : 14 - 122 F, -10 ~ +50 C Dimensions (WxHxD)16.6 x 3.6 x 13.7" , 420 x 88 x 350mm Weight : 13.2 lb ,6 kg Dit product is z.g.a.n. in orginele doos !! incl. 23% BTW