• Four E1 or T1 channels and Fast Ethernet link multiplexed over a fiber optic link
• Various fiber interfaces: multimode, single-mode (up to 120 km), and/or single-mode
over single fiber, using SFP optical modules
• Automatic link backup with optional hot-swappable second main link
• Power redundancy with optional second wide-range power supply
• Management via ASCII terminal, dedicated Ethernet port, SNMP management station,
or a Web-based remote access terminal
The Optimux-108 and Optimux-106 multiplexers combine four E1 or T1 channels and an optional Ethernet link
over a fiber optic uplink.
A pair of Optimux units provides a simple and low-cost solution for connectivity over distances of up to 120 km (74.5 miles). For transmission reliability, an optional modular second link provides automatic backup upon link failure. An optional second power supply provides power redundancy for failsafe operation.
Each of the four signals of the tributary interface is transmitted independently, so that each channel can be set to a
different clock source.
MARKET SEGMENTS AND APPLICATIONS
Typical users of the Optimux-108/106 fiber multiplexers for 4E1/4T1 and Ethernet or serial data include transportation and utility companies, government and universities, Internet Service Providers (ISPs), and carriers
extending data and voice from SDH networks or backhauling cellular traffic.
Figure 1 and Figure 2 illustrate Optimux-108/106 in typical applications.
INTEROPERABILITY
Optimux-108/106 operates with OP-108C/106C modules of LRS-102 and Megaplex-4100 access nodes.
UPLINK AND TRIBUTARIES
Optimux-108/106 supports a variety of built-in optical uplink interfaces including:
• 1310 nm LED for multimode fiber
• 1310/1550 nm laser diode or long haul laser diode for extended range over single-mode fiber
• Single fiber (SF1, SF2 options) using a 1310 nm and 1550 nm laser diode transmitter with WDM technology, which enables the laser to transmit the signal at a different wavelength than the receive signal
• Single fiber (SF3 option) using SC/APC (Angle-Polished Connector) technology, with a 1310 nm laser diode for single wavelength operation
• Single fiber (SF4, SF5 options) using a 1310 nm and 1550 nm long haul laser diode transmitter with WDM technology
Model : OP-106/R/SC/13L/D
Dit is een nieuw product !! (verpakking kan beschadigd zijn )
€ 249,95 Oorspronkelijke prijs was: € 249,95.€ 139,95Huidige prijs is: € 139,95. incl. 23% BTW
Beoordelingen
Er zijn nog geen beoordelingen.