Displacement sensors model 8718, using a resistance track made of conductive plastic material, are suitable for direct, accurate and absolute measurements of displacements and lengths.
Special processes are applied to give the resistance tracks low friction, low tendency to stick/slip, resistance to abrasion and long-term stability.
The vibration-cushioned slider allows a clear signal output even by slight shocks or high operating speeds up to 10 m/s. Due to its simple design the sensor is largely protected against electrical interference fields (Al-housing), it keeps the measured value after a power failure and does not generate any electrical interference.
A magnetically held steel band covers the whole measurement device gap free. Any lateral forces are avoided by a ball joint coupling mounted to the sensor.
- Full scale : 100 mm
- Output : Potentiometric
- Non-Linearity : ±0.05 % FS, ±0.10 % FS
- Resolution : 0.01 mm
- Excitation : 0 - 50 V DC
- IP Rating : IP40
- Min Temperature : -30 °C
- Max Temperature 100 °C
Alleen gebruikt in proefopstelling.
€ 89,95 Oorspronkelijke prijs was: € 89,95.€ 49,95Huidige prijs is: € 49,95. incl. 23% BTW