Extra informatie
| Gewicht | 1 kg |
|---|
Digital Keyboard Switch TK-12b
€ 19,95 incl. 23% BTW
- zoals op de foto.
- nieuw in doos.
Je moet ingelogd zijn om een beoordeling te plaatsen.
Gerelateerde producten
-
Digital Keyboard Switch TK-12b
- zoals op de foto.
- nieuw in doos.
-
Everfocus EP028 8ch 8AS Video Alarm Auto Switcher
Everfocus EP028 8ch Video Alarm Auto Switcher
Refurbished € 49,95 incl. 23% BTW -
Siemens Proximity Card Reader AR6181-MX
Ar6181-mx, lezer zonder codebedieningde proximity-/vicinitylezer ar6181-mx. Is ontworpen voor toegangscontrole volgens de normen iso14443-a, iso14443-b en iso15693. De lezer leest het unieke serienummer of het gepersonaliseerde id nummer van mifare, my-c of my-d-kaartenmet. De lezer kan firmware op afstand worden gedownload. De configuratie verloopt via programmering op afstand of via een configcard. De lezer kan worden aangesloten op de controller voor twee lezers van sipass networked of sipass integratedtechnologie van kaarten 13.56 Mhz.- leesafstand kaart 7 cm (ca.)
- Voedingsspanning 12 tot 24 v dc/ac (±15%)
- opgenomen vermogen max3 w
- bedrijfstemperatuur -20 tot +60 °c
- nominale ip waarde ip 65
- indicatoren 1 led (rood/groen/oranje)
- 1 x zoemerinterface met controller rs485-bewaakt cerpass-protocolclock/data of omron/wiegandconfiguratie via rs485-interface of configcard
- afmetingen (b x h x d) 85.5 X 91 x 40 mm
- behuizing pc/abs kunststof
- kleur zilver (ral9006)
- goedkeuring ce, fcc
-
Panasonic WJ-SX150A 16-input matrix switcher
The Panasonic WJ-SX150A matrix switcher supports the connection of up to 16 cameras, 4 monitors and 4 system controllers. Additionally, this unit offers full pan, tilt, zoom and iris control of up to 4, RS-485 equipped cameras. Images outputted from this device can be displayed in full screen on 4 monitors or in various tour groups of up to 16 cameras on a single screen. At the event of an alarm or video loss, this unit can be set to follow a different tour sequence. Setup and configuration is done using a local PC via an RS-232C port with the required software included. 16-Channel Supports the connection of up to 16 color or B/W cameras, 4 monitors and 4 system controllers. Any camera signal can be routed to any connected monitor. PTZ Control Controls up to 4 RS-485 equipped cameras for full pan, tilt, zoom and iris operation. Optional Long Range Operation The use of RG-59 cabling supports cable runs of up to 3000' (900m) while maintaining control, synchronization and high quality images. Multi-Image Display with Auto Switching Images outputted from this unit can be displayed in full or in groups of up to 16 images on a single screen while following a programmed tour sequence. This allows cameras on specific zones or floors to be synchronized together on a designated group of monitors. Alarm Function At the event of an alarm, this unit can be set to follow a new sequential tour set. Video Loss Detection Alerts the operator to problems such as a power outage, severed cables or damaged cameras. Secure User Management Employs a sophisticated user management system to prevent improper use by unauthorized persons. Specificaties- Signal System : NTSC
- Channels : 16
- Video In: BNC x16
- Camera Output (loop through): BNC x16
- Monitor Output: BNC x1
- External Input: BNC x1
- External Output: BNC x1
- RS-485 (camera) Port: x1 (6-conductor modular jack)
- Data Port: RS-485 x1 (6-conductor modular jack)
- Alarm Port: 25-pin D-sub connector
- Serial Port: 9-pin D-sub connector
- Camera Switching Input: RCA x1
Beoordelingen
Er zijn nog geen beoordelingen.