Extra informatie
| Gewicht | 0,3 kg |
|---|
D-Link DFE-550TX 10/100TX Managed PCI Adapter
€ 5,95 incl. 23% BTW
- 10/100Base-T & IEEE 802.3x Flow Control Compliant
- Supports IP Multicast Packet Filtering
- Supports PXE Boot ROM & RPL
Je moet ingelogd zijn om een beoordeling te plaatsen.
Gerelateerde producten
-
Cisco VIC2-2BRI-NT TE Two-port Voice Interface Card
This two-port ISDN terminal-side or network-side Basic Rate Interface (BRI) voice interface card connects directly to PSTNs and PBX/PABXs and supports both on-premise and off-premise connections. Supports a total of four voice channels in a single interface card via two RJ-45 physical ports, and enables toll-bypass and voice-over-packet features. PRODUCT DETAILS- Device Type Voice interface card
- ISDN Interface ISDN BRI
- Digital Ports Qty 2
- System Requirements Cisco IOS
- Designed For Cisco 1711, 1712, 1721, 1751, 1760, 2600, 2610, 2611, 2612, 2613, 2620, 2621, 2650, 2651, 2691, 2811, 2821, 2851, 2901, 2911, 2921, 2951, 3620, 3631, 3640, 3660, 3661, 3662, 3725, 3745, 3825, 3845, 3845 V3PN, 3925, 3945
- Device Type Voice interface card
- Enclosure Type Plug-in module
- Connectivity Technology Wired
- ISDN Interface ISDN BRI
- Protocols & Specifications ITU Q.921, ITU Q.931, ITU Q.920
- Digital Ports Qty 2
- Compatible Slots 1 x Expansion Slot
- Compliant Standards EN 60950, IEC950, UL 1950, FCC Part 68, JATE, CS-03, CSA C22.2, ACA TS031, CTR 3
- OS Required Cisco IOS
-
Linksys WUSB600N Wireless-N USB Network Adapter
Model- Brand : Linksys
- Model : WUSB600N
- Standards : IEEE 802.11a/b/g, IEEE802.11n Draft
- Security : Security features: WEP, WPA, and WPA2
- Security key bits: Up to 256-bit encryption
- Interface : USB 2.0
- Frequency Band : 2.4 GHz / 5 GHz
- Link/Act
- Transmitted Power
- Transmitted Power:
- 2.4GHz Wireless-N @ <16 dBm (Typical)
- 5GHz Wireless-N @ <16 dBm (Typical)
- 2.4GHz Wireless-N @ <-91dBm (Typical)
- 5GHz Wireless-N @ <-91dBm (Typical)
- 2.4GHz Wireless @ ± (Typical): 2dB +/-1dB
- 5GHz Wireless @ ± (Typical): 4dB +/- 1dB
- 2 Internal Antennas
- 600 MHz or faster PC
- 512 MB of RAM Memory
- CD-ROM drive
- MIMO technology uses multiple radios to create a robust signal that travels farther and reduces dead spots
- Performance Investment Protection: Compatibility with Wireless-B (802.11b) and Wireless-G (802.11g) Standards
- Easy to use Setup Wizard
- Dimensions : 3.9" x 1.1" x 0.4"
- Weight : 0.79 oz
- Temperature : 0°C - 40°C (32°F - 104°F)
- Humidity : 10% - 85%, Non-Condensing
-
D-Link DFE-530TX+10/100 PCI Fast Ethernet Desktop Adapter
10/100Mbps PCI Card for PC D-Link's DFE-530TX Fast Ethernet adapter is a high-performance Installable in a Pentium or Pentium Pro PC equipped with PCI expansion slots, this adapter turns a desktop into a high bandwidth graphic/multimedia workstation or a power server running at full-duplex speed. Powerful Performance The adapter operates in the 32-bit Bus Master mode, delivering throughputs at multi-megabits per second with little stress on the Ethernet or 100BASE-TX Fast Ethernet completely without any host's CPU. Supporting PCI clock speeds independently of the network clock, it transfers data directly to/from the host's memory, by-passing the CPU to alleviate the host's workload. Easy Migration The adapter allows users to migrate from Ethernet to Fast Ethernet in easy steps. 10BASE-T users can upgrade to 100BASE-TX anytime without changing driver software or network cables. Network Security Network administrators can install optional boot ROMs on the adapters to implement network security. Diskless workstations equipped with these ROMs can remote boot from NetWare or Windows NT servers and access authorized data. Auto-sensing 10/100Mbps Interface The adapter's single connector connects to either 10BASE-T Ethernet or 100BASE-TX Fast Ethernet completely without any need to set configuration. It detects the connected hub's or switch's capability and auto-negotiates to use the highest available speed. Full Duplex Support Full/half duplex operation is auto-detected in both 10BASE-T Ethernet to Fast Ethernet 100BASE-TX modes. When connected to a switch in full duplex, the network speed can be increased to 200Mbps, making the adapter an ideal NIC for high-speed server deployment. Comprehensive Driver Support The adapter supports all major network operating systems, including NetWare, Windows and Linux.€ 8,95 incl. 23% BTWSpecs
- 10/100Mbps NWay interface
- Full duplex supported for both 10BASE-T, 100BASE-TX
- 32-bit PCI bus master operation
- Remote boot supported
- Low Ethernet command processing overhead
- Easy-to-view diagnostic LEDs
- Single shielded RJ-45 connector
- Simply Plug and Play
- UTP and STP supported
- Complete driver support
- Support IEEE 802.1x Port-based Network Access Control (MD5 only)
- low-profile bracket included in the box
- 2-year warranty
-
EnGenius EUB9603 EXT 150Mbps Wireless-N USB Adapter
The EUB9603 EXT is a revolutionary 11N 1T1R USB adapter with external antenna. It is fully forward compatible with 802.11 b/g standard and support pre-N technology. This model is capable of achieving 3 times faster performance than G generation products. It features full coverage of wireless security including WEP 64/128, WPA and WPA2 and supports TKIP and AES encryption. Advanced external antenna design guarantees superior sensitivity and transmit power in comparison with tradition printed antenna. External antenna allows users to upgrade antenna for higher gain and extended coverage. USB interface and multiple driver support allows EUB9603 EXT to be installed on any popular OS (including Windows 7/XP/2000/Vista and MacOS). EUB9603 EXT is definitely a production of mobility and flexibility. Specificaties :- Wi-Fi Data Rate: 150Mbps (1T1R)
- 23dBm high power
- Antenna: 1 x internal (printed / 2dBi)
- Software AP support
- OS: Windows 7, Windows Vista, XP & MacOS
Beoordelingen
Er zijn nog geen beoordelingen.