Panasonic WJ-SX150A 16-input matrix switcher

incl. 23% BTW

The Panasonic WJ-SX150A matrix switcher supports the connection of up to 16 cameras, 4 monitors and 4 system controllers. Additionally, this unit offers full pan, tilt, zoom and iris control of up to 4, RS-485 equipped cameras. Images outputted from this device can be displayed in full screen on 4 monitors or in various tour groups of up to 16 cameras on a single screen. At the event of an alarm or video loss, this unit can be set to follow a different tour sequence. Setup and configuration is done using a local PC via an RS-232C port with the required software included.

16-Channel
Supports the connection of up to 16 color or B/W cameras, 4 monitors and 4 system controllers. Any camera signal can be routed to any connected monitor.

PTZ Control
Controls up to 4 RS-485 equipped cameras for full pan, tilt, zoom and iris operation.

Optional Long Range Operation
The use of RG-59 cabling supports cable runs of up to 3000′ (900m) while maintaining control, synchronization and high quality images.

Multi-Image Display with Auto Switching
Images outputted from this unit can be displayed in full or in groups of up to 16 images on a single screen while following a programmed tour sequence. This allows cameras on specific zones or floors to be synchronized together on a designated group of monitors.

Alarm Function
At the event of an alarm, this unit can be set to follow a new sequential tour set.

Video Loss Detection
Alerts the operator to problems such as a power outage, severed cables or damaged cameras.

Secure User Management
Employs a sophisticated user management system to prevent improper use by unauthorized persons.

Specificaties

Signal System : NTSC
Channels : 16

Connectors

Video In: BNC x16
Camera Output (loop through): BNC x16
Monitor Output: BNC x1
External Input: BNC x1
External Output: BNC x1
RS-485 (camera) Port: x1 (6-conductor modular jack)
Data Port: RS-485 x1 (6-conductor modular jack)
Alarm Port: 25-pin D-sub connector
Serial Port: 9-pin D-sub connector
Camera Switching Input: RCA x1

Power Requirements : 120 VAC
Power Consumption : 60W
Operating Temperature : 14 – 122 F, -10 ~ +50 C
Dimensions (WxHxD)16.6 x 3.6 x 13.7″ , 420 x 88 x 350mm
Weight : 13.2 lb ,6 kg

Dit product is z.g.a.n. in orginele doos !!

Extra informatie

Gewicht	8 kg

Beoordelingen

Er zijn nog geen beoordelingen.

Wees de eerste om “Panasonic WJ-SX150A 16-input matrix switcher” te beoordelen

Je moet ingelogd zijn om een beoordeling te plaatsen.

Gerelateerde producten

Aanbieding

Robot MV94e Color Multivision Plus Processor NTSC

-12VDC -1.3 AMPS -Model: MV94e Refurbished incl. 23% BTW

Digital Keyboard Switch TK-12b

zoals op de foto.
nieuw in doos.

€ 19,95 incl. 23% BTW

Everfocus EP028 8ch 8AS Video Alarm Auto Switcher

Everfocus EP028 8ch Video Alarm Auto Switcher

Refurbished € 49,95 incl. 23% BTW

Aanbieding

Nedap Invexs 170 MK170B card reader 9834230

The Invexs 170 readers combine modern design with advanced functionality. Unique multiple card reading technology makes the readers capable of simultaneously reading different card technologies, which is extremely useful during migrations or when a company uses a mix of card technologies.

Modern design, optionally with touch keys or screen
Suitable for all commonly used access control systems and technologies
Multiple output protocols
For indoor use

Modern design The modern, stylish look of the Invexs readers perfectly matches contemporary office design. The optional high-quality touch keys on the Invexs 170 keypad are software-controlled and light up automatically when a valid pass is presented. “Multiple reader” technology Invexs readers are capable of simultaneously reading Nedap, MIFARE and DESFire EV1 cards. Among many other advantages, this functionality makes smooth migration possible. Different cards can be stored in a mixed database, meaning that there is no need to change all the data overnight. Configuration and programming Invexs readers are highly versatile in terms of their functionality and output, which can be configured to Wiegand, the RS485 protocol (AEOS-coded or ‘plain’) or to XS RF modulation. Invexs readers are easy to configure and program. AEreco (AEOS REader COnfiguration) software, a special configuration tool for Invexs and other AEOS readers is used to generate the configuration file, which can then be deployed to the reader with a configuration card or using AEmon, a configuration program for AEOS AEpacks and software components. Invexs range In addition to the Invexs 170, the Invexs 190 range is also available from Nedap

Dimensions L x W x H: 171 x 75 x 25 mm
Weight Approx. 0.2 kg
Power consumption 12 VDC – 30 VDC, 70 mA @ 12 VDC, 35 mA @ 24 VDC
Environmental conditions Temperature range: Operation: 0 - 55 °C. Storage: -30 - 65 °C
Relative humidity: 10 - 93% (non-condensing)
Communication

- RS485 (encrypted AEOS or ‘plain’ protocol; user-definable) - Wiegand Data 0 and Data 1 (depending on configuration) - RF Modulator (120 kHz for AX1014 or AB350)

Inputs 3: open collector; buzzer and 2 LEDs
Detection range Nedap: approx. 15 cm, MIFARE: approx. 5 cm, DESfire: approx. 1 cm
Reader wiring

- RS485: 2 x 2 x 0.25 mm² shielded, max. 1000 m - Wiegand: 4 x 0.25 mm² shielded, max. 150 m - Optional: 3 x 0.25 mm² (LEDs, buzzer)

IP rating IP54

Dit is een nieuw product !! incl. 23% BTW