Extra informatie
| Gewicht | 9 kg |
|---|
Aanbieding!
Velleman VDPSP151 4 kanaals analoge lichtsturing
Oorspronkelijke prijs was: € 74,95.€ 59,95Huidige prijs is: € 59,95. incl. 23% BTW
4-kanaals power pack.
KENMERKEN VELLEMAN VDPSP151
- 4 kanalen (met Schuko-pluggen)
- ingang: 0-10V
- extra beveiligd door automatische hoofdzekering (20A)
- bevestiging aan muur of via klem
SPECIFICATIES VELLEMAN VDPSP151
- voeding: 230Vac
- aantal kanalen: 4
- max. totale belasting: 3520W
- max. totale stroom: 16A
- max. belasting per kanaal: 1100W
- uitgangen: 4 x SCHUKO-stekkers
- analoge ingang: 8-pin DIN aansluiting (0-10Vdc)
- analoge uitgang: 8-pin DIN aansluiting (0-10Vdc)
- zekeringen: 4 x F6.3A 250V / onderbreker 16A
- afmetingen: 298 x 165 x 96mm
- gewicht: 2.8kg
Dit is een nieuw product !!
1 op voorraad
Je moet ingelogd zijn om een beoordeling te plaatsen.
Gerelateerde producten
-
Kramer RK-WP6 19−Inch Rack Adapter for Single Wall Plate Inserts zwart
19-inch rack adapter for mounting 6 single slot wall plate inserts into a 1U rack space.- Compatibility - Models compatible with the RK−WP6 are also compatible with RK−WP16.
-
Dynacord DCS408 DCS 408 100V relais module 80441B
De modules uit de DCS 400-reeks vormen een aanvulling op de beheermogelijkheden van het PROMATRIX-systeem®, waardoor het toepassingsbereik van het systeem wordt uitgebreid. DCS kan ook worden geïntegreerd in een reeds geïnstalleerd systeem als er een extra behoefte is om de functionaliteit uit te breiden. Er zijn 2 opties voor het uitvoeren van modules:- De modules, aangeduid als DCS 4xx, zijn gemaakt in Euro Card-formaat en zijn bevestigd op het achterpaneel van het montageframe of in de daarvoor bestemde vakken.
- Modules aangeduid als DCS 4xxR worden geïnstalleerd in het DCS 400-installatieframe.
-
Extron VSW 2VGA A
Two Input VGA and Stereo Audio Switcher The Extron VSW 2VGA A is a compact and economical two input, one output, active switcher for VGA and stereo audio. It allows users to select between two VGA sources with audio and route the selected source to a video output device such as a data monitor or projector. In addition, the VSW 2VGA A provides a buffered local monitor output for input one. Multiple VSW 2VGA A switchers can be daisy-chained using Extron high performance pre-fabricated VGA cable to create a multi-user presentation system.
Inclusief voeding !! Oorspronkelijke prijs was: € 129,95.€ 69,95Huidige prijs is: € 69,95. incl. 23% BTWVSW 2VGA A Video Gain Unity Bandwidth 300 MHz (-3 dB) Video input and loop through Number/signal type 2 VGA-QXGA RGBHV, RGBS, RGsB*, RsGsBs*, HDTV component video* input 1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video* local monitor loop-through NOTE RGsB, RsGsBs, and HDTV component video inputs and outputs work in manual mode only. Autoswitching requires TTL level sync on pin 13 of the 15-pin HD connector. Connectors 3 female 15-pin HD Pin connections ID bits on pins 4, 11, 12, 15 from inputs 1 and 2: passed to main output Pin 9 of input 1: floating Pin 9 of input 2: used for the Show-Me feature Nominal level 1.0 Vp-p for Y of component video 0.7 Vp-p for RGB and for R-Y and B-Y of component video Minimum/maximum levels Analog: 0.4 V to 1.8 Vp-p with no offset Impedance 75 ohms Horizontal frequency 15 kHz to 145 kHz Vertical frequency 30 Hz to 170 Hz Video output Number/signal type 1 VGA-QXGA RGBHV, RGBS, RGsB*, RsGsBs*, HDTV component video* (follows input type) Connectors 1 female 15-pin HD Nominal level 1.0 Vp-p for Y of component video 0.7 Vp-p for RGB and for R-Y and B-Y of component video Minimum/maximum levels 0.4 V to 1.8 Vp-p (follows input) Impedance 75 ohms NOTE ID bits are passed through from VGA inputs to the VGA output. Sync Input type RGBHV, RGBS, RGsB*, RsGsBs*, bi-level and tri-level (HDTV) component video sync Output type RGBHV, RGBS, RGsB*, RsGsBs*, bi-level and tri-level (HDTV) component video sync (follows input) Input level 1.8 V to 5.0 Vp-p Output level TTL: 5.0 V p-p, unterminated Input impedance 510 ohms Output impedance 50 ohms Max. input voltage 5.0 Vp-p Max. rise/fall time 40 ns Polarity Positive or negative (follows input) Audio Gain Unbalanced output: 0 dB Frequency response 20 Hz to 20 kHz, ±0.05 dB THD + Noise 0.002% @ 1 kHz at nominal level (-10 dBV) S/N 94 dB at maximum output (unweighted) Crosstalk -50 dB @ 20 kHz, -75 dB @ 1 kHz and below 60 Hz Stereo channel separation 96 dB @ 1 kHz Audio input Number/signal type 2 stereo, unbalanced Connectors (2) 3.5 mm mini audio jacks (tip, ring, sleeve) Impedance 22k ohms unbalanced, AC coupled Nominal level -10 dBV (316 mVrms) Maximum level +9 dBV, (unbalanced) at 1% THD+N NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu Audio output Number/signal type 1 stereo, unbalanced Connectors (1) 3.5 mm mini audio jack (tip, ring, sleeve) Impedance 50 ohms unbalanced Gain error ±0.1 dB channel to channel Maximum level (Hi-Z) >+9 dBV, unbalanced at 1% THD+N Maximum level (600 ohm) >+7 dBV, unbalanced at 1% THD+N Control/remote — switcher Contact closure (1) 3.5 mm captive screw connector, 3 pole for momentary contact Contact closure pin configurations 1 = input 1 select, 2 = input 2 select, 3 = GND Shorting all three pins together enables autoswitch mode. Loop signal Momentary low, 250 µs General External power supply 100 VAC to 240 VAC, 50-60 Hz, external; to 12 VDC, 1 A (max.), regulated Power input requirements 12 VDC, 0.1 A Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing Cooling Convection, no vents Mounting Rack mount Yes, with optional 1U rack shelf Furniture mount Yes, with optional under-desk mounting kit or through-desk mounting kit Pole mount Yes, with optional pole mount kit Enclosure type Metal Enclosure dimensions 1.0" H x 4.3" W x 3.0" D (quarter rack wide) 2.5 cm H x 10.9 cm W x 7.6 cm D (Depth excludes connectors.) Product weight 0.5 lb (0.3 kg) Shipping weight 3 lbs (2 kg) Vibration ISTA 1A in carton (International Safe Transit Association) Regulatory compliance Listings CE, c-UL, UL Compliances CE, C-tick, FCC Class A, ICES, VCCI Warranty 3 years parts and labor NOTE All nominal levels are at ±10%. NOTE Specifications are subject to change without notice. -
Gentner ClearOne XAP 400 XAP400 Audio Conferencing System Microphone Mixer
ClearOne 910-151-201 Model XAP 400 4-channel AEC Microphone Mixer with Built-in Telephone Hybrid and Amplifier, Distributed Echo Cancellation on every mic input, Noise cancellation on each mic/line input, Full-duplex sound enables participants to speak and listen at the same time without cutting in and out, First-mic priority eliminates hollow “tunnel” sound by activating only the microphone closest to the person speaking, Four microphone/line inputs, with four additional line inputs, Eight outputs, 20 Hz-20 kHz bandwidth for full-range audio response, Automatic level control and automatic gain control. General Information- Manufacturer : ClearOne
- Manufacturer Part Number : 910-151-201
- Product Name : Model XAP 400 4-channel AEC Microphone Mixer with Built-in Telephone Hybrid and Amplifier
- Superior Audio Performance
- Distributed Echo Cancellation® on every mic input
- Noise cancellation on each mic/line input
- Full-duplex sound enables participants to speak and listen at the same time without cutting in and out
- First-mic priority eliminates hollow “tunnel” sound by activating only the microphone closest to the person speaking
- Four microphone/line inputs, with four additional line inputs
- Eight outputs
- 20 Hz-20 kHz bandwidth for full-range audio response
- Automatic level control and automatic gain control
- Four input filters on each of four mic inputs; 15 filters on each of four independent processing blocks
- Scalable – link multiple XAP units (XAP 400, XAP 800, XAP TH2) for extensive microphone coverage and up to 16 phone lines
- 25x26 matrix with level control (in .5 dB steps) at each cross point to simplify complex mixing operations; Clear Matrix button easily clears cross points
- Wide variety of system control options: ClearOne IR Remote, Volume Control, Select Control, 3rd-party control systems such as AMX, Crestron
- Configuration control through included G-Ware™ software, RS-232 port
- Enhanced expansion bus, featuring 12 bidirectional audio buses
- Four mic gating groups allow separation of mics into individual mixer gating groups for greater configuration flexibility
- Labels for all inputs, outputs, macros and presets are saved within the unit
- Front panel control of gain and mute
- 32 presets that can be executed on-the-fly without disturbing other ongoing preset operations
- Macro scripting language and recorder simplifies macro creation with point-and-click convenience
- RAMP serial command for greater control over gain adjustments – no external volume card required
- Built-in telephone interface and power amplifier
- Link with multiple XAP TH2s for up to 16-line capability
- Also link to XAP 800 to add conferencing capability
- Inclusief afstandsbediening
Beoordelingen
Er zijn nog geen beoordelingen.