Winkel
Resultaat 1393–1408 van de 2714 resultaten wordt getoond
-
Kramer 708 Video & Audio Twisted Pair Receiver
The Twisted Pair series are used in pairs (transmitter & receiver) for transmitting video & audio over long distances using twisted pair wire. Termination switches allows several receivers to be looped through on the same line (one transmitter - several receivers). User controlled Gain & HF compensation are standard. Best for distances up to 200 meters. At shorter distances, they provide closer to broadcast level performance. Composite Video & Audio over Twisted Pair Transmitter & Receiver The 707 and 708 are a twisted pair transmitter and receiver for composite video and unbalanced mono audio signals. The 707 transmitter converts a composite video and audio signal to a twisted pair signal and the 708 receiver converts the twisted pair signal back into composite video and audio signals.Kramer 708 Video & Audio Twisted Pair Receiver Specifications:
- INPUTS: 1 composite video, 1Vpp/75_, on a BNC connector. 1 audio, 1mV-2V/33k. on an RCA connector.
- OUTPUTS: 1 balanced, 150_ on a 6/4 standard telephone socket.
- BANDWIDTH (PAIR): Video: 58MHz; Audio: 30kHz at 30 meters without lightening arrestors.
- NON-LINEARITY (PAIR): Less 0.2% at short distances.
- DIFF. GAIN (PAIR): 0.41%.
- DIFF. PHASE (PAIR): 0.3 Deg.
- K-FACTOR (@ 20M, PAIR): 0.1%.
- S/N RATIO (PAIR): 72 dB.
- CONTROLS: Video Gain: -1.8 /+ 2.3dB, EQ above 2.5 MHz 0 / 16dB, Audio: 0 / 52dB. 707: Condenser Mic Power.
- 708: loop termination, signal invert.
- POWER SOURCE: 12 VDC 40mA.
- DIMENSIONS: 12cm x 7.5cm x 2.5cm (4.7 x 2.95 x 0.98, W, D, H.)
- WEIGHT: 0.28 kg. (0.62 lbs.) approx.
- ACCESSORIES: Power supply, mounting bracket.
- OPTIONS: Model VA-50P power supply with six 12VDC outlets.
- RK-T1, RK-T3, 19 rack adapters.
- Weight: 3 lbs.
Kramer 708 Video & Audio Twisted Pair Receiver Features:
- Bandwidth - 58MHz (- 3dB) at 400 Meters.
- Twisted Pair Connectors - RJ-11 (phone).
- Level (Gain) and EQ (Peaking) Controls (708).
- Looping Input (708).
- Selectable Input Signal Termination (708).
- Audio Input Level (707) - Line or condenser mic (selectable).
- INV Polarity Switch (708) - Inverts the incoming polarity.
- System Range - Up to 1000 meters (3200).
- Cable - UTP (unshielded twisted pair) such as CAT5.
- Compact Size - Part of the Kramer TOOLS family ocfompact, high quality and cost effective solutions.
-
Kramer CVG-105S 105s Distribution Amplifier 1×5 Y/C S-Video Mini Series
The 105S is a one input, five output Y/C (s-video) video distribution amplifier in comprehensive's mini-series. It offers a small compact size, quality video distribution at an affordable price point. Used in video distribution for monitors, duplication and many other critical video applications.Compact Size
Part of Comprehensive's mini-series this DA is small enough for multiple units to fit into an existing rack space. It also is portable enough to use on location productions, video assist for film and various audio-video applications requiring video signal distribution.Oorspronkelijke prijs was: € 139,95.€ 99,95Huidige prijs is: € 99,95. incl. 23% BTWQuality Video Distribution
Utilizing the Y/C (s-video) format this unit is a higher resolution alternative to composite video; for the descriminating director or client who wants to view a significantly better signal than is offered by composite video.AC or DC Operation
This unit comes standard with an AC adaptor for studio operation but, can be adapted to those situations where AC power is not accessable. The 105S can be powered by 12 VDC from an automobile, camera power or any other 12 VDC supply. Where multiple units are used an optional VA-50P can be purchased so only one AC outlet has to be accessed for up to six units. Dit is een nieuw product !! -
Kramer Electronics Switcher 4x1S
The 4x1S is a high-performance switcher for s-Video (Y/C) signals. It switches any one of four signals to a single output.- High Bandwidth (Y) - 400MHz (-3dB).
- Mechanical (Passive) Switching - No power required.
- Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
-
Kramer PT-102V 1×2 Video Distribution Amplifier
he Kramer PT102VN is a distribution amplifier for composite video or SDI signals. It takes one input, provides correct buffering and isolation and distributes the signal to two identical outputs.Oorspronkelijke prijs was: € 119,95.€ 99,95Huidige prijs is: € 99,95. incl. 23% BTWKramer Electronics PT-102VN Features
- High Bandwidth - 430MHz (-3dB)
- Level (Gain) and EQ (Peaking) Controls
- Ultra Compact PicoTOOLS - 4 units can be rack mounted side-by-side in a 1U rack space with the optional RK-4PT rack adapter
Kramer Electronics PT-102VN Specifications
- Input : 1 video, 1Vpp/75 Ohm on a BNC connector
- Output : 2 video, 1Vpp/75 Ohm on BNC connectors
- Max. Video Output : 2Vpp
- Video Bandwidth (-3dB) : 430MHz
- Diff. Gain : 0.05%
- Diff. Phase : 0.05 Deg
- K-factor : <0.05%
- S/N Ratio : 76.1dB
- Control Gain: -1.2 to +6 dB, EQ.: 0 to +7.5dB @50MHz., via trimmers accessible from the front panel
- Coupling : AC
- Power Source : 12V DC, 30mA
- Dimensions : 6cm x 6.5cm x 2.5cm (2.36" x 2.56" x 1") W x D x H
- Weight : 0.14kg (0.31lbs) approx
-
Kramer RK-WP16 19 inch Rack Adapter voor 16 Single or 8 Double Wall Plate Inserts (incl. 10 blank inserts)
19-inch rack adapter for wall plate inserts with 8 double slots that can hold 16 single or 8 double slot inserts in a 2U rack space.- Size - Standard 19" (2U).
- incl. 10 blank inserts
-
Kramer RK-WP6 19−Inch Rack Adapter for Single Wall Plate Inserts zwart
19-inch rack adapter for mounting 6 single slot wall plate inserts into a 1U rack space.- Compatibility - Models compatible with the RK−WP6 are also compatible with RK−WP16.
-
Kramer tbus-1axl Table Mount Modular Multi-Connection Solution with tilt-up lid
The Kramer TBUS-1Axl is the enclosure of a new modular system with a tilt-up lid. A complete TBUS system requires the enclosure, an inner frame, a power socket, inserts and a power cord. NOTE: The TBUS enclosure, power socket, power cord & inserts are purchased separately.Kramer TBUS-1Axl Key Features
- Cover - Manually opens & closes.
- Inner Frame - 6 different "TIAF" inner frame options are available that can accommodate a combination of up to 4 power sockets, 6 cable pass-through or connector inserts, 1 long insert and up to 3 Kramer TOOLS.
- Power Sockets - 8 different "TS" single and 8 dual power socket options are available to accommodate the power requirements worldwide.
- Power Cord - 8 different "C-AC" single power cords (and 3 "Y" power cords) for each power socket.
- Optional Accessories - TBUS Brackets, K-Able Box Cable Reels, Step-In Modules and Controllers are available.
- UL and CE Qualified.
- Connector Depth - Adjustable.
- Installation Requirement - Table cutout of 19.1cm x 15.2cm (7.51in x 5.98in).
- Dimensions - 20.5cm x 17cm x 13.2cm (8.1" x 6.7" x 5.2") W, D, H.
- Weight - TBUS-1Axl: 1.5kg (3.3lbs) approx.; table clamps: 0.26kg (0.57lbs); metal template: 0.125kg (0.28lbs).
-
Kramer TOOLS VP-211DS Automatic VGA / UXVGA / Audio Switcher
The VP-211DS is a high performance switcher for computer graphics video signals, with resolutions ranging from VGA through UXGA and higher, and unbalanced stereo audio signals. When configured as a standby switcher, it will switch to the secondary input upon loss of the primary input.- Inputs: 2 VGA/UXGA on HD15F connectors. 2 unbalanced stereo audio on 3.5 mm mini audio connectors
- Outputs: 1 VGA/UXGA on an HD15F connector. 1 VGA/UXGA on an HD15F connector (input #1 loop). 1 unbalanced stereo audio on a 3.5 mm mini audio connector.
- Max. Output Level: Video: 1.8 Vpp; Audio: 5Vpp.
- Bandwidth (-3db): Video: 300MHz; Audio: 100 kHz.
- Diff. Gain: 0.04%
- Diff. Phase: 0.03 deg.
- Crosstalk: Video: -56 dB @ 5 MHz; Audio: -52 dB @ 1kHz.
- K-Factor: <0.05%
- S/N Ratio: Video: 70.6 dB; Audio: 89 dB unweighted.
- Controls: Input 1 termination switch, contact closure remote control, input 1 ID bit switch (accessible from the underside). Input default selection switches (accessible from the underside).
- Coupling: DC
- Audio THD + NOISE: 0.019%.
- Audio 2nd HARMONIC: 0.003%.
- Power Source: 12 VDC, 50 mA
- Dimensions:12 cm x 7.5 cm x 2.5 cm (4.7” x 2.95” x 0.98”, W, D, H).
- Weight: 0.3 kg. (0.66 lbs.) Approx.
- Accessories: Power supply
- Options: RK-T1 or RK-T3 19 inch rack mount kit.
-
Kramer TP-11 TP11 Video Audio Transmiter
Kramer TP-11 Video Audio Line-zender. Model: TP-11 AV Line zender / ontvanger Kit geleverd: - transmitter - voedingskabel Refurbished Oorspronkelijke prijs was: € 39,95.€ 24,95Huidige prijs is: € 24,95. incl. 23% BTW -
Kramer TP-12 TP12 Video Audio Transmiter
Kramer TP-12 audio/video transmitter Refurbished Oorspronkelijke prijs was: € 39,95.€ 24,95Huidige prijs is: € 24,95. incl. 23% BTW -
Kramer TP-123 Computer AudioVideo RS-232 Transmitter
The Comprehensive / Kramer TP-123 Audio/Video RS-232 Transmitter is a component of an array of products intended to extend the reach of computer cables, dramatically increasing the distance between source and monitoring station. This allows a user to cleanly extend their studio, video, or security applications beyond the short cabling that restricts the spacing of devices. Using a compatible receiver, the TP-123 can send audio, serial, and video signals by converting them into a feed that is sent down a twisted-pair (Ethernet) cable. Any CAT5 network cable can be used to link Tx and Rx at a distance of up to 328' (100 m). One added convenience is the Power Connect system, which allows both Tx and Rx to receive power from a single source; this feature requires both units to have the Power Connect system. To convert the signals back to a standard computer video, data, or a digital/analog audio signal at the other end of your wiring configuration, use the Comprehensive / Kramer TP-124, or any other compatible Comprehensive / Kramer receiver.Oorspronkelijke prijs was: € 89,95.€ 69,95Huidige prijs is: € 69,95. incl. 23% BTW- System Range up to 328' (100 m). Greater distances are possible, depending on signal resolution and cable
- Power Connect System - Only one unit in an array, the Tx or Rx, needs to be connected to a power source. All the system units must have the Power Connect system in order to use this feature
- Capable of handling HDTV resolution
- Level (gain) & EQ (peaking) controls, to fine tune signal
- Up to UXGA resolution
- Uses readily-available UTP (unshielded twisted pair) cable such as CAT5
- Part of the PicoTOOLS family of extremely compact, high-quality and cost-effective electronic solutions
Kramer TP-123 Specs
Dit is een nieuw product !!Input Video: 1x VGA/UXGA standard 15-pin connector Audio: 1x 3.5mm analog stereo input Data: RS-232 serial interface on 2-pin terminal block Output 1x RJ-45 Twisted-pair network cable jack Output Level Video: 1 Vpp Audio: 2.5 Vpp Bandwidth Video: 350 MHz Audio: 20 Hz - 20 kHz @ 0.5 dB S/N Ratio (Video) Audio: <-80dB Power Input 12 VDC - 60 mAh Dimensions (WxDxH) 4.70 x 2.95 x 0.98" (12 x 7.5 x 2.5 cm) Weight 0.67 lb (0.3 kg) -
Kramer VM-10AR VM10AR video distributieversterker
Het VM-10AR-model van Kramer is een 10-voudige audio / video distributie versterker . Oorspronkelijke prijs was: € 79,95.€ 59,95Huidige prijs is: € 59,95. incl. 23% BTW -
Kramer VM-3Vxl 3:1 distribution amplifier
The KRAMER VM-3V/xl is a full bandwidth, 1:3 video distribution amplifier designed for studio and other demanding applications. The VM-3V/xl splits a single input source into three identical outputs with no discernible signal degradation. Video output and input signals are AC coupled for maximal flexibility. The VM-3V/xl receives external 12V DC feed, and is housed in a very compact enclosure, making it ideal for field use. Function: DA 1:3 Composite/Single Component Video DA Input: 1 Composite Video, 1Vpp/75ohm, on a BNC connector- Output Type: 3 Composite Video, 1Vpp/75ohm, on BNC connectors
- Output Coupling: AC
- Controls: Termination Switch
- S/N Ratio: 77dB
- Video Bandwidth: 430 MHz -3dB
- Max Video Output: 2Vpp
- Diff. Gain: 0.05%
- Diff. Phase: 0.13Deg.
- K-Factor: 0.2%
- Dimensions (W, D, H): 11.7cm x 6cm x 3.2cm (4.6" x 2.4" x 1.3")
- Weight Approx.: 0.28kg (0.62lbs.)
- Power consumption: 0.6VA
- Power Source: 12VDC, 50mA
-
Kramer VP-200xln 1:2 Computer Graphics Video Line & Distribution Amplifier
The VP-200xln is a high-performance line and distribution amplifier for computer graphics video signals with resolutions up to and exceeding UXGA. It provides controls to compensate for signal losses inherent in long cable runs.Features & Benefits
- High Bandwidth - 400MHz (-3dB).
- HDTV Compatible.
- Level (Gain) and EQ (Peaking) Controls.
- ID Bit Control.
- AC/DC Coupling Selection - Individually for R, G, & B signals.
Product Specifications
Dit is een nieuw product !! Oorspronkelijke prijs was: € 149,95.€ 109,95Huidige prijs is: € 109,95. incl. 23% BTWInputs 1 UXGA on a 15-pin HD (F) connector Outputs 2 UXGA on 15-pin HD (F) connectors Max Output Level 2Vpp Bandwidth 400MHz Diff. Gain 0.05% Diff. Phase 0.03Deg K-Factor <0.05% S/N Ratio 71dB Controls Level: -1.5dB to +6.1dB; EQ.: 0 to +7.3dB @50MHz Coupling AC/DC Power Consumption 12V DC 95mA Operating Temperature 0° to 40°C (32° to 104°F) Storage Temperature -40° to +70°C (-40° to 158°F) Product Dimensions W, D, H 4.72" x 2.81" x 0.96" (12.00cm x 7.15cm x 2.44cm) Product Weight 0.4 lbs (0.2kg) -
Kramer VP-210K 1:1 Computer Graphics Video Line Amplifier
Product Highlights
- High-Bandwidth (350MHz)
- Compensates for Attenuation of Signals
- Compatible with HDTV Signals
- Level (Gain) & EQ (Peaking) Controls
The Kramer VP-210K Computer Graphics Video Line Amplifier (1:1), with a high-bandwidth (350MHz), compensates for attenuation of signals due to transmission over long cables. It is compatible with HDTV signals, and has Level (Gain) and EQ (Peaking) Controls to control the output of the amplifier. In addition to a looping input, the amplifier has a selectable input signal termination. Provided with selectable Kr-isp Advanced Sync Processing, the VP-210K Computer Graphics Video Line Amplifier (1:1) offers a restoring sync signal, and is compatible with computers that have low-sync level. Being compact in size (4.7 x 2.95 x 0.98” / 12 x 7.5 x 2.5cm), 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adaptor.Oorspronkelijke prijs was: € 109,95.€ 79,95Huidige prijs is: € 79,95. incl. 23% BTW- High-bandwidth (350MHz) amplifier
- Compensates for attenuation of signals due to transmission over long cables
- Compatible with HDTV signals and has Level (Gain) and EQ (Peaking) Controls to control the output of the amplifier
- Looping input
- Selectable input signal termination
- Provided with selectable Kr-isp Advanced Sync Processing
- Offers a restoring sync signal and is compatible with computers that have low-sync level
- Compact in size (4.7 x 2.95 x 0.98" / 12 x 7.5 x 2.5cm)
- 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adaptor
Kramer VP-210K Specs
RefurbishedInput 1 UXGA on a 15-pin HD (F) connector;1 LOOP UXGA on an 15-pin HD (F) connector Output 1 UXGA on a 15-pin HD (F) connector Video Bandwidth 350MHz Differential Gain 0.41% Differential Phase 0.53Deg Video S/N Ratio 66dB K-Factor <0.05% CONTROLS Level: -1.2 to +6.3dB; EQ: 0 to +4dB @50MHz Power Source 5V DC, 108mA Dimensions 4.7 x 2.95 x 0.98" / 12 x 7.5 x 2.5cm Weight 0.25kg (0.55lbs) approx Accessories Power supply Options RK-3T 19" rack adaptor -
Kramer VP-23 AV Conference Multimedia Switcher Unit
The VP-23 is a 4x1 composite video, a 4x1 s-Video (Y/C) and a 4x1 computer graphics switcher each with unbalanced stereo audio. It is designed for a wide variety of presentation and multimedia applications. Typical Applications:- Presentation and conference room systems.
- Rental and staging, Production studios.
- High Bandwidth - 315MHz (- 3dB) computer graphics video, s-Video (Y) 260MHz (- 3dB), 470MHz (- 3dB) composite video
- Audio and Computer Graphics Video Level (Gain) Controls.
- Microphone Input Level Control.
- Master Audio Output - Input selectable.
- Talk Over Button - Microphone input signal mutes the line audio output when a microphone detects sound.
- Control - Front panel & RS-232 (K-Router™ Windows® - based software is included).
INPUTS: 4 VGA/XGA on HD-15F connectors, 4 s-Video, 1Vpp (Y), 0.3Vpp (C)/75Ω on 4p connectors, 4 composite video 1Vpp/75Ω on BNC connectors. Each input is accompanied by the appropriate audio stereo channels:+ 4dBm/50 kΩ on RCA connectors. Mic: 3 mV/10kΩ.- OUTPUTS: 1 x VGA/XGA, 1 s-Video - 1Vpp (Y), 0.3Vpp (C)/75Ω on a 4p connector, 1 composite video 1Vpp/75Ω on a BNC connector. Each output is accompanied by the appropriate audio stereo channel: + 4dBm/150Ω,1 master audio + 4dBm/150Ω.
- MAX OUTPUT: Video: 2.1Vpp; audio: 27Vpp.
- BANDWIDTH (-3dB): XGA/VGA: 315MHz; s-Video (Y): 260MHz; composite video: 470MHz; audio: 40kHz.
- DIFF. GAIN: 0.07 % all channels.
- DIFF. PHASE: 0.05 Deg. all channels.
- S/N RATIO: Video: 75dB all channels; audio: 75dB/1Vpp, all channels.
- CONTROL: 16 selector switches; VGA/XGA level: up to 4dB; Audio: up to 6dB, Mic: up to 49dB, Mic Talk over switch,Mic type selector switch (rear).
- POWER SOURCE: 230VAC, 50/60Hz, (115VAC, U.S.A.) 16VA. - Serial: 05050439288
- DIMENSIONS: 19 inch (W) x 7-inch (D) x 2U (H), rack mountable.
- WEIGHT: 3.6kg. (8lbs.) approx.
- Power Cord
