SAMSUNG DVR 4Ch Real-time Standalone H.264 SHR-3040
The SAMSUNG SHR-3040, 4 channel DVR, is designed to be a perfect replacement for the outdated technology of VCRs and a cost effective solution for basic security installation requirements. Its H.264 codec compression makes this DVR a cost effective solution due to the less storage requirements when compared with MPEG4 system. It has up to 4 channel audio input and 1ch of audio output and built in web server for users convenience. SHR-3040 is capable of recording 120 fps at CIF real time recording resolution.
Main Features
– 4CH DVR
– Video ( H.264) / Audio ( ADPCM)
– CIF Real-time recording capability
( High Resolution of full D1 Recording Support)
– Up to 4Ch Audio Inputs and 1Ch Audio Output
– Combined BNC and VGA Video Output for main display
( up to 1280×1024)
– SATA I/ F HDD Support ( Internal Max. HDDx1)
€119.95 incl. 21% BTW
Linudix LWS-800 4 channel network video server
4 channel video server with 30 fps per channel (120 fps in total), M-JPEG
- 4x BNC video aansluiting
- netwerkaansluiting
- seriele aansluiting
- Incl. adapter
€229.95 €179.95 incl. 21% BTW
Bosch LTC 8016-90 16-Channel Allegiant Bilinx Data Interface Unit
The LTC 8016-90 is a Bilinx data interface Allegiant unit from Bosch that is specially designed to be used for delivering communication over the coax for 16 Dinion™ and AutoDome® Bilinx-compatible cameras. The LTC 8016-90 data interface unit comes compatible with controllers/switches, and is capable of providing complete control over pre-position, auxiliaries, and pan/tilt/zoom functions of AutoDome Bilinx enabled cameras. The LTC 8016-90 data interface unit also features Bilinx Technology, down the coax event reporting, cascade units, auto-sensing setup, a charcoal case, a 15W power rated voltage, a wide operating temperature, as well as a rack mount kit, and a lightweight size. This data interface unit is capable of delivering increased performance, and is reliable for any application.
Features
- Bilinx technology interface for Allegiant Series matrix switcher/controllers
- Up-the-coax Pan/Tilt/Zoom (PTZ), auxiliary, and preposition control
- Down-the-coax event reporting
- Auto-sensing setup for simplified installation
- Data input allows other devices to control Bilinx PTZ cameras
€249.95 incl. 21% BTW
Robot MV94e Color Multivision Plus Processor NTSC
-12VDC
-1.3 AMPS
-Model: MV94e
€49.95 incl. 21% BTW
Nedap AEOS Convexs MND80C Access control reader 9896040
Convexs readers make it possible for customers with an existing access control system to migrate smoothly and without complication to MIFARE or DESFire technology. All Convexs readers are available as surface-mount or flush-mount units (specially designed for wall power sockets).
- Unique combination of card reading technologies
- Suitable for all commonly used access control systems and technologies
- For indoor and outdoor use
Different card technologies
AEOS is capable of combining all commonly used reader and card technologies in a single system. Systems that use Nedap card technology can be converted to MIFARE/DESFire cards and readers without complication. This is because the Convexs reader can be integrated as a replacement for existing antennas. In addition, the existing antenna wiring can be reused. An added advantage is that migration can be implemented in controlled phases, as the Convexs reader is capable of handling several different card types simultaneously.
Enhanced security
Based on the choice of card technology, secure airborne data transfer between the card and card reader is achieved via CRYPTO1, triple DES or 128bits-AES encryption. As standard, the Convexs features an SAM (Secure Access Module) holder, which allows the use of an SAM for key storage and execution of high-security encryption algorithms.
Configuration and programming
The Convexs reader configuration determines functionality and output. The configuration file is generated using AEreco (AEOS REader COnfiguration) software and deployed to the Convexs reader via AEmon or with a configuration card.
Integration with external systems
Convexs readers can be linked to external controllers using a Wiegand interface. A standard RS485 protocol (‘plain’) may also be used.
Specificaties
- Dimensions Surface-mount: L x W x H: 80 x 80 x 32 mm ,Flush-mount: L x W x H: 80 x 80 x 27 mm, 11 mm protrusion
- Weight Approx. 0.1 kg
- Power consumption 12 – 30 VDC, 70 mA @ 12 VDC, 35 mA @ 24 VDC
Environmental conditions
- Temperature range: Operation: -20 – 55 °C. Storage: -30 – 65 °C
- Relative humidity: 10 – 93% (non-condensing)
- Communication – RS485 (encrypted AEOS or ‘plain’ protocol; user-definable)
- – Wiegand Data 0 and Data 1 (depending on configuration)
- – RF Modulator (120 kHz for AX1014 or AB350)
- Detection range Nedap: approx. 8 cm, MIFARE: approx. 6 cm, DESFire: approx. 3 cm
- Wiring for – Wiegand: max 150 m; 2 x 2 x 0.25 mm² shielded
- – RS485: 2 x 0.25 mm², max. 1000 m; 1 x 2 x 0.25 mm² shielded, communication only
- -RF Modulator: max. 50 m; 5 x 0.25 mm² shielded, existing wiring (via Convexs adapter)
- IP rating Surface-mount; IP52, Flush-mount; IP54
Dit is een nieuw product !!
€79.95 incl. 21% BTW
Beoordelingen
Er zijn nog geen beoordelingen.