Pelco REL2064 Relay Interface Unit 64 Outputs
€149.95 incl. 21% BTW
Controls up to 64 Relay Contact Outputs. The REL2064 relay interface unit connects directly to the System 6800 matrix switcher/controller and provides dry contacts for direct or automatic control of peripheral equipment. Each REL2064 provides up to 64 single-pole, single-throw (SPST) dry contact outputs.
Features
- 64 SPST Dry Contact Outputs
- Provides Direct or Automatic Control of Peripheral Equipment
- Connect to the CM6800 Series Matrix Switchers Using Pelco’s M Protocol
- Uses RS-485 Communication Interface
- Multiple Units May be Cascaded to Provide Multiple Relay Contact Points on a Single M Port Connection
- Relay Output Contacts May be Configured for Normally Open (N.O.) or Normally Closed (N.C.) Operation
- Relay Groups Can Retain Their Contact Position in the Event of a Power Failure or Front Panel Reset
- Powered by an Auto-Ranging Power Supply
1 op voorraad
- Extra informatie
- Beoordelingen (0)
Extra informatie
| Gewicht | 5 kg |
|---|
Be the first to review “Pelco REL2064 Relay Interface Unit 64 Outputs”
Je moet ingelogd zijn om een beoordeling te plaatsen.
Gerelateerde producten
-
Uitverkocht
Verder lezenQuick ViewGolmar Vercoma MC-V2Plus Multiplexer serie
€99.95 incl. 21% BTW- Actieve strengverdeler en strengkoppelaar
- 4 strengen uit en 3 buitendeurpanelen in
- Wordt op eigen voeding FA-V2Plus aangesloten
- Afmetingen: 178 x 90 x 60 mm (b x h x d)
Kort in proef opstelling gebruikt !!
Verder lezenQuick View -
In winkelmandQuick ViewSAMSUNG DVR 4Ch Real-time Standalone H.264 SHR-3040
€119.95 incl. 21% BTWThe SAMSUNG SHR-3040, 4 channel DVR, is designed to be a perfect replacement for the outdated technology of VCRs and a cost effective solution for basic security installation requirements. Its H.264 codec compression makes this DVR a cost effective solution due to the less storage requirements when compared with MPEG4 system. It has up to 4 channel audio input and 1ch of audio output and built in web server for users convenience. SHR-3040 is capable of recording 120 fps at CIF real time recording resolution.
Main Features
– 4CH DVR
– Video ( H.264) / Audio ( ADPCM)
– CIF Real-time recording capability
( High Resolution of full D1 Recording Support)
– Up to 4Ch Audio Inputs and 1Ch Audio Output
– Combined BNC and VGA Video Output for main display
( up to 1280×1024)
– SATA I/ F HDD Support ( Internal Max. HDDx1)In winkelmandQuick View -
Uitverkocht
Verder lezenQuick ViewBosch LTC 5136 AutoDome-controller
€129.95 incl. 21% BTW- Compleet, ergonomisch bedieningspaneel
- Bediening met een joystick met variabele snelheid
Features:
- Controls a Single AutoDome® Camera System or Standard Allegiant® Receiver/Drivers
- Operates up to 8 Controllable cameras In a Daisy-Chain Configuration
- Controls All AutoDome® System Features Including Auto Playback
- Small, Compact Design
- Ergonomic Layout For Single-Handed Control
- The LTC 5136 Series AutoDome® Controllers provide complete control of the AutoDome system\’s advanced features including variable speed, auto tour, 99 presets, and full pan/tilt/zoom operation – all from a single one-handed control unit.
LTC 5136/51
- Nominale spanning 220 – 240 VAC, 50/60 Hz
- Spanningsbereik 195,5 tot 253 VAC
- Energieverbruik 6 W
- Nominale spanning 120 VAC, 50/60 Hz
- Spanningsbereik 105 tot 132 VAC
- Energieverbruik 6 W
- Afmetingen (H x B x D) 101 x 220 x 155 mm
- Gewicht 0,55 kg
Verder lezenQuick View -
Uitverkocht
Verder lezenQuick ViewVista VQCM4 Quad processor kwadrant voor 4 cameras
€99.95 incl. 21% BTWDeze Vista Quad Processor geeft op een monitor 4 verschillende camera beelden weer.
Quad processor met 4 ingangen voor aansluiting op een monitor of TV.Geschikt voor analoge cctv systemen, ook wel composiet camerabewaking systemen genoemd, dit is echt de goedkoopste manier om 4 camera’s in één keer in beeld te krijgen! Alle Camera aansluitingen zijn BNC.
Specificaties
– Beeld: 860×625 pixels
– 4 kanaals real time weergave
– Weergave op volledige schermgrootte
– Zoom: 380×290
– Alarm bij verbroken video signaal
– Alarm bij verbroken aansluiting
– Tijd/datum weergave
– Bevries/statische funktie
– Programmeren via menu op volledig scherm
– L:085018Verder lezenQuick View -
In winkelmandQuick ViewRobot MV94e Color Multivision Plus Processor NTSC
€49.95 incl. 21% BTW-12VDC
-1.3 AMPS
-Model: MV94eIn winkelmandQuick View -
Uitverkocht
Verder lezenQuick ViewElro DVR14 bewakingsrecorder
€39.95 incl. 21% BTWDe DVR14 is hét ideale apparaat om via USB je bewakingscamera’s aan te sluiten op je pc. Wanneer je deze bewakingsrecorder op je computer aansluit kunnen alle beelden op je pc bekeken en opgeslagen worden. De opslagcapaciteit wordt enkel beperkt door de harde schijf van je computer.
Kenmerken:
– de software wordt meegeleverd
– continue-opname of na detectie van beweging (detectie door software)
– gelijktijdig beelden bekijken en opnemen
– er kunnen 4 camera’s worden aangesloten
– beelden zijn op afstand te bekijken via het internetDit is een nieuw product !!
Verder lezenQuick View -
In winkelmandQuick ViewPanasonic WJ-SX150A 16-input matrix switcher
€400.00 incl. 21% BTWThe Panasonic WJ-SX150A matrix switcher supports the connection of up to 16 cameras, 4 monitors and 4 system controllers. Additionally, this unit offers full pan, tilt, zoom and iris control of up to 4, RS-485 equipped cameras. Images outputted from this device can be displayed in full screen on 4 monitors or in various tour groups of up to 16 cameras on a single screen. At the event of an alarm or video loss, this unit can be set to follow a different tour sequence. Setup and configuration is done using a local PC via an RS-232C port with the required software included.
16-Channel
Supports the connection of up to 16 color or B/W cameras, 4 monitors and 4 system controllers. Any camera signal can be routed to any connected monitor.PTZ Control
Controls up to 4 RS-485 equipped cameras for full pan, tilt, zoom and iris operation.Optional Long Range Operation
The use of RG-59 cabling supports cable runs of up to 3000′ (900m) while maintaining control, synchronization and high quality images.Multi-Image Display with Auto Switching
Images outputted from this unit can be displayed in full or in groups of up to 16 images on a single screen while following a programmed tour sequence. This allows cameras on specific zones or floors to be synchronized together on a designated group of monitors.Alarm Function
At the event of an alarm, this unit can be set to follow a new sequential tour set.Video Loss Detection
Alerts the operator to problems such as a power outage, severed cables or damaged cameras.Secure User Management
Employs a sophisticated user management system to prevent improper use by unauthorized persons.Specificaties
- Signal System : NTSC
- Channels : 16
Connectors
- Video In: BNC x16
- Camera Output (loop through): BNC x16
- Monitor Output: BNC x1
- External Input: BNC x1
- External Output: BNC x1
- RS-485 (camera) Port: x1 (6-conductor modular jack)
- Data Port: RS-485 x1 (6-conductor modular jack)
- Alarm Port: 25-pin D-sub connector
- Serial Port: 9-pin D-sub connector
- Camera Switching Input: RCA x1
Power Requirements : 120 VAC
Power Consumption : 60W
Operating Temperature : 14 – 122 F, -10 ~ +50 C
Dimensions (WxHxD)16.6 x 3.6 x 13.7″ , 420 x 88 x 350mm
Weight : 13.2 lb ,6 kgDit product is z.g.a.n. in orginele doos !!
In winkelmandQuick View -
-22%Uitverkocht
Verder lezenQuick ViewKaba Benzing B-Net 93 20 terminal voor tijdregistratie
€89.95€69.95 incl. 21% BTWVerder lezenQuick View -
Uitverkocht
Verder lezenQuick ViewBosch LTC 8016-90 16-Channel Allegiant Bilinx Data Interface Unit
€249.95 incl. 21% BTWThe LTC 8016-90 is a Bilinx data interface Allegiant unit from Bosch that is specially designed to be used for delivering communication over the coax for 16 Dinion™ and AutoDome® Bilinx-compatible cameras. The LTC 8016-90 data interface unit comes compatible with controllers/switches, and is capable of providing complete control over pre-position, auxiliaries, and pan/tilt/zoom functions of AutoDome Bilinx enabled cameras. The LTC 8016-90 data interface unit also features Bilinx Technology, down the coax event reporting, cascade units, auto-sensing setup, a charcoal case, a 15W power rated voltage, a wide operating temperature, as well as a rack mount kit, and a lightweight size. This data interface unit is capable of delivering increased performance, and is reliable for any application.
Features
- Bilinx technology interface for Allegiant Series matrix switcher/controllers
- Up-the-coax Pan/Tilt/Zoom (PTZ), auxiliary, and preposition control
- Down-the-coax event reporting
- Auto-sensing setup for simplified installation
- Data input allows other devices to control Bilinx PTZ cameras
Verder lezenQuick View -
-48%
In winkelmandQuick ViewNedap AP4001X toegangscontroller
€249.95€129.95 incl. 21% BTWIn winkelmandQuick View
Beoordelingen
Er zijn nog geen beoordelingen.