Lantronix seriele server UDS1100-IAPLantronix seriele server UDS1100-IAP
Lantronix seriele server UDS1100-IAP 2Lantronix seriele server UDS1100-IAP 2
Lantronix seriele server UDS1100-IAP 3Lantronix seriele server UDS1100-IAP 3

Lantronix seriele server UDS1100-IAP

119.95 incl. 21% BTW

Lantronix seriele server: UDS1100-IAP kenmerken

1 x DB25F DCE, 1 x 10/100Base-T RJ-45, DSTNI-EX 48 MHz, 256 KB SRAM, 2 MB Flash, LED

Lantronix UDS1100-IAP, LAN, 100 – 240, 64 x 23 x 90 mm, ARP, UDP, TCP, ICMP, Telnet, TFTP, AutoIP, DHCP, HTTP, SNMP TCP, UDP, Telnet, TFTP, Lantronix DSTNI-EX, SNMP, Telnet, HTTP

External Device Server

– In minutes, securely connect factory floor devices to enterprise systems
– Access, monitor and control equipment over Ethernet
– Replace dedicated PCs and/or modem lines with fast and reliable Ethernet networking
– Supports RS-232, RS-422 and RS-485 communications
– Includes Modbus TCP, ASCII, RTU and DF1 protocols
– 15kV serial ESD protection
– Wide -40°– 70°C operating temperature range
– Environmentally-friendly RoHS and WEEE-compliant

The UDS1100-IAP is a rugged and powerful tool which enables users to connect, manage and control just about any piece of industrial equipment from virtually anywhere over Ethernet or the Internet.

This single-port Device Server is a quick, simple and inexpensive way to bring the advantages of real-time or on-demand information access.

Standards Based Communications

Using an open Ethernet architecture as a standard provides the flexibility for equipment to communicate to virtually any type of industrial device.

When used in conjunction with an OPC server, most Windows based HMI, SCADA and PC-based control applications have full access to information in the industrial equipment networked by the UDS1100-IAP.

Extending Serial Communications Across the Globe

Our approach to network-enabling devices is transparent to your attached equipment and software so you won’t need to change the way you work. Using a method called serial tunneling, the UDS1100-IAP encapsulates serial data into packets and transports it over Ethernet. Serial tunneling can be done in multiple ways:

– Using Lantronix supplied Com Port Redirector software, Windows device applications not designed for network communications are re-directed to communicate to devices connected to the UDS1100-IAP.
– Connecting two UDS1100-IAP Device Servers configured to automatically talk to each other over the network creates virtual serial connections that can extend serial communications across a facility or around the world.

Built-in Web Server

The built-in web server enables users to access and configure the UDS1100-IAP from a standard web browser. Web pages enabling the UDS1100-IAP to be customized for unique applications can be built using Lantronix development tools. On-board Flash memory provides room for future system software upgrades and maintenance-free, nonvolatile web page storage.
Easy to Set Up and Use

The UDS1100-IAP can be set up locally through its serial port, or remotely using Telnet or a web browser. The included DeviceInstaller™ Windows-based configuration software simplifies setup and provides an easy way to:

– Assign IP & other network specific addresses
– Load custom web pages
– Enable web-based configuration of the Device Server
– Ping or query the attached device(s) over the network
– View specific device data files
– Upgrade firmware
– Simplify process of installing industrial protocols

Complete with an auto MDI/MDIX Ethernet interface, the UDS1100-IAP is a powerful device communication solution that’s perfect for your most demanding industrial applications.

Modem Replacement

In modem emulation mode, the UDS is used to replace dialup modems. The unit accepts modem AT commands on the serial port. It then establishes a network connection to the end device, leveraging network connections and bandwidth to eliminate dedicated modems and phone lines.

RoHS logoRoHS-compliant, the UDS1100-IAP meets Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment.

If you’re looking for a transparent, cost-effective, and scalable means to network-enable your industrial automation equipment, look no further than the UDS1100-IAP.

SPECIFICATIES

Lantronix seriele server: UDS1100-IAP specificaties
Beheerfuncties
Beheerprotocollen SNMP, Telnet, HTTP
Design
Certificering UL, CSA, FCC, CE,TUV, CTick,VCCI
Eisen aan de omgeving
Temperatuur, in bedrijf -40 – 70 °C
Temperatuur bij opslag -40 – 85 °C
Energie
Ingangsspanning 100 – 240 V
Geheugen
Flash memory 2 MB
Interne RAM 0.256 MB
Gewicht en omvang
Gewicht 200 g
Afmetingen (BxDxH) 64 x 23 x 90 mm
Indicatie
LED-indicatoren LAN
Overige specificaties
Compatibele besturingssystemen Windows 98/ME/NT/2000/XP
Poorten & interfaces
Aantal Ethernet LAN (RJ-45)-poorten 1
Processor
Frequentie van processor 48 MHz
Type processor Lantronix DSTNI-EX
Protocollen
Ondersteunde netwerkprotocollen ARP, UDP, TCP, ICMP, Telnet, TFTP, AutoIP, DHCP, HTTP, SNMP TCP, UDP, Telnet, TFTP
Technische details
Overdrachtssnelheid 0.230 Mbit/s
Seriële poort(en) 1
Soort serieële aansluiting RS-232/422/485
Ethernet LAN, data-overdrachtsnelheden 10,100 Mbit/s
Isolatie 1.5 kV
Electrostatic Discharge (ESD) bescherming 15 kV

1 op voorraad

Categorie:
  • Extra informatie
  • Beoordelingen (0)

Extra informatie

Gewicht 1 kg

Beoordelingen

Er zijn nog geen beoordelingen.


Be the first to review “Lantronix seriele server UDS1100-IAP”