-46%
Extron VSW 2VGA AExtron VSW 2VGA A
Extron VSW 2VGA A 2Extron VSW 2VGA A 2

Extron VSW 2VGA A

129,95 69,95 incl. 21% BTW

Two Input VGA and Stereo Audio Switcher

The Extron VSW 2VGA A is a compact and economical two input, one output, active switcher for VGA and stereo audio. It allows users to select between two VGA sources with audio and route the selected source to a video output device such as a data monitor or projector. In addition, the VSW 2VGA A provides a buffered local monitor output for input one. Multiple VSW 2VGA A switchers can be daisy-chained using Extron high performance pre-fabricated VGA cable to create a multi-user presentation system.

VSW 2VGA A
Video
   Gain Unity
   Bandwidth 300 MHz (-3 dB)
Video input and loop through
   Number/signal type 2 VGA-QXGA RGBHV, RGBS, RGsB*, RsGsBs*, HDTV component video* input
1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video* local monitor loop-through
    NOTE RGsB, RsGsBs, and HDTV component video inputs and outputs work in manual mode only. Autoswitching requires TTL level sync on pin 13 of the 15-pin HD connector.
   Connectors 3 female 15-pin HD
   Pin connections ID bits on pins 4, 11, 12, 15 from inputs 1 and 2: passed to main output
Pin 9 of input 1: floating
Pin 9 of input 2: used for the Show-Me feature
   Nominal level 1.0 Vp-p for Y of component video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
   Minimum/maximum levels Analog: 0.4 V to 1.8 Vp-p with no offset
   Impedance 75 ohms
   Horizontal frequency 15 kHz to 145 kHz
   Vertical frequency 30 Hz to 170 Hz
Video output
   Number/signal type 1 VGA-QXGA RGBHV, RGBS, RGsB*, RsGsBs*, HDTV component video* (follows input type)
   Connectors 1 female 15-pin HD
   Nominal level 1.0 Vp-p for Y of component video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
   Minimum/maximum levels 0.4 V to 1.8 Vp-p (follows input)
   Impedance 75 ohms
    NOTE ID bits are passed through from VGA inputs to the VGA output.
Sync
   Input type RGBHV, RGBS, RGsB*, RsGsBs*, bi-level and tri-level (HDTV) component video sync
   Output type RGBHV, RGBS, RGsB*, RsGsBs*, bi-level and tri-level (HDTV) component video sync (follows input)
   Input level 1.8 V to 5.0 Vp-p
   Output level TTL: 5.0 V p-p, unterminated
   Input impedance 510 ohms
   Output impedance 50 ohms
   Max. input voltage 5.0 Vp-p
   Max. rise/fall time 40 ns
   Polarity Positive or negative (follows input)
Audio
   Gain Unbalanced output: 0 dB
   Frequency response 20 Hz to 20 kHz, ±0.05 dB
   THD + Noise 0.002% @ 1 kHz at nominal level (-10 dBV)
   S/N 94 dB at maximum output (unweighted)
   Crosstalk -50 dB @ 20 kHz, -75 dB @ 1 kHz and below 60 Hz
   Stereo channel separation 96 dB @ 1 kHz
Audio input
   Number/signal type 2 stereo, unbalanced
   Connectors (2) 3.5 mm mini audio jacks (tip, ring, sleeve)
   Impedance 22k ohms unbalanced, AC coupled
   Nominal level -10 dBV (316 mVrms)
   Maximum level +9 dBV, (unbalanced) at 1% THD+N
    NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output
   Number/signal type 1 stereo, unbalanced
   Connectors (1) 3.5 mm mini audio jack (tip, ring, sleeve)
   Impedance 50 ohms unbalanced
   Gain error ±0.1 dB channel to channel
   Maximum level (Hi-Z) >+9 dBV, unbalanced at 1% THD+N
   Maximum level (600 ohm) >+7 dBV, unbalanced at 1% THD+N
Control/remote — switcher
   Contact closure (1) 3.5 mm captive screw connector, 3 pole for momentary contact
   Contact closure pin configurations 1 = input 1 select, 2 = input 2 select, 3 = GND
Shorting all three pins together enables autoswitch mode.
   Loop signal Momentary low, 250 µs
General
   External power supply 100 VAC to 240 VAC, 50-60 Hz, external; to 12 VDC, 1 A (max.), regulated
   Power input requirements 12 VDC, 0.1 A
   Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Cooling Convection, no vents
   Mounting
      Rack mount Yes, with optional 1U rack shelf
      Furniture mount Yes, with optional under-desk mounting kit or through-desk mounting kit
      Pole mount Yes, with optional pole mount kit
   Enclosure type Metal
   Enclosure dimensions 1.0″ H x 4.3″ W x 3.0″ D (quarter rack wide)
2.5 cm H x 10.9 cm W x 7.6 cm D
(Depth excludes connectors.)
   Product weight 0.5 lb (0.3 kg)
   Shipping weight 3 lbs (2 kg)
   Vibration ISTA 1A in carton (International Safe Transit Association)
   Regulatory compliance
      Listings CE, c-UL, UL
      Compliances CE, C-tick, FCC Class A, ICES, VCCI
   Warranty 3 years parts and labor
    NOTE All nominal levels are at ±10%.
    NOTE Specifications are subject to change without notice.

Inclusief voeding !!

6 op voorraad

  • Extra informatie
  • Beoordelingen (0)

Extra informatie

Gewicht 1 kg

Beoordelingen

Er zijn nog geen beoordelingen.


Be the first to review “Extron VSW 2VGA A”