Atop SE5001 1-Port Serial Device Servers, supporting RS232, DB9(M)

Atop SE5001 1-Port Serial Device Servers, RS232, DB9(M)

49,95 incl. 21% BTW

Flexible configuration options enable this unit to be setup over Ethernet by Telnet, Web browser, Serial Console, or other Windows utilities. Packed in a rugged metal housing for wall or DIN-Rail mount with 5~30VDC wide power input range, SE5001 is ideal for almost any industrial and manufacturing automation.

ATOP Virtual COM software provides existing Windows based application to access serial device by mapping to remote serial server via Ethernet.

Specially Designed for Automation Fields
In industrial and manufacturing automation fields, SE5001 is used as a field device to connect Ethernet through TCP/IP protocol directly. It is also specially designed for conjunction with PLCs, HMIs, Barcode Scanners, Data Terminals, Electronic Kanbans, Shop Floor Control Systems, and Pick-to-Light Systems.
Cigarette pack size
Rugged metal case with DIN-Rail/wall-mount
Watch Dog Timer 1.34 sec. hardware auto reset
15KV ESD protection for serial signals
10/100Mbps Fast Ethernet full duplex auto negotiation
Support TCP server/client, UDP for Virtual COM mode and Tunneling mode
Monitor, manage and control industrial field devices remotely
Configuration: Web server page/Serial Console/Telnet Console
Monitor IP configuration for Windows
Upgrade firmware from remote-PC via Ethernet
Redundant dual DC power inputs for non-stop operation S

CPU :16-bit x86 Embedded CPU
Flash : 512K Bytes
RARAM : 512K Bytes SDRAM
EEPROM : 512 Bytes
Watchdog :ASIC Hardware built-in

Compliance : IEEE802.3
Port : 1-port
Transmission Rate : 10/100Mbps Auto-detection
Connector : RJ-45
Auto MDI/MDI-X : Yes

Link Mode
TCP Server : Single connection or Virtual Com mode
TCP Client : SiSingle destination
UDP : Single destinationfont>

Interface : RS-232
Ports : 1-port
Baud Rate : 1200bps~230Kbps
Parity : None, Odd, Even, Mark, Space
Data Bits : 7, 8
Stop Bits : 1, 2
Flow Control : None, Software: Xon/Xoff, Hardware: RTS/CTS
Protection : 15KV ESD
Connector : 9-pin D-Sub

Input : DC 5 ~ 30V
Consumption : Max. 1.5W

EMC FCC Class A, CE Class A

Operating : 0°C ~ 60°C ( 32º ~ 140ºF )
Storage : -40º ~ 85ºC ( -40º~ 185ºF ), 5 ~ 95%RH

W x H x D : 65mm x 78mm x 28mm

Configuration : Web Page / Telnet / Serial console / Windows utility
Virtual Com : Windows port redirection software

Support Protocol
ICMP, TCP(UDP) / IP, DHCP client, SNMP, SMTP, HTTP, Telnet

Dit is een nieuw product !!


  • Extra informatie
  • Beoordelingen (0)

Extra informatie

Gewicht 1 kg


Er zijn nog geen beoordelingen.

Be the first to review “Atop SE5001 1-Port Serial Device Servers, RS232, DB9(M)”

Translate »